| Thread | Last Post | Replies |
|
| Got rearended, need to know what you guys think | 23 Aug 2006 19:00 GMT | 9 |
I got rear ended on sat and although i was able to drive it home, it just aint right. I was the middle guy in a 3 car wreck so front and back were damaged. The thing is, the damage doesnt looke that bad, bumpers are messed up the rear tailgate wont colse and there is some
|
| THE REDNECK JEEP CLUB VIDEO | 23 Aug 2006 07:19 GMT | 7 |
A friend of mine took this country song, changed the words and I put it to video =) Nova Scotia...The redneck Jeep Club... http://media.putfile.com/The-Redneck-Jeep-Club-2006
|
| Help with Light tabs for 1.5" tubing | 23 Aug 2006 06:18 GMT | 4 |
I want to mount a few lights on my tj front bumper with the pre runner guard from garvin. I am specfically looking for something like this http://www.teakatoys.com/Hummer_H1_Light_Tabs_for_1_5_inch_Tubing_pair_by_p/sma- 101-113-1.htm These look like you have to drill through the ...
|
| ATF+4 in '97 TJ | 23 Aug 2006 05:05 GMT | 16 |
Mea Culpa. I took my '97 TJ to the Jeep dealer to get an erratic oil pressure issue fixed. They replaced the sender, but I haven't driven it long enough to know if it solved my problem there.
|
| 1998 Jeep Cherokee power loss, missing, no codes...TPS?? | 22 Aug 2006 22:17 GMT | 19 |
Hey y'all; I've got one of those "mystery problems," could use some help. I drive 98 Cherokee Sport, 4.0L inline 6, with manual transmission, around 110K miles. The problem I have is this: at about 2000 RPM, the engine
|
| dumb question. | 22 Aug 2006 08:10 GMT | 20 |
This is what I get for dropping my Jeep off at a Dodge dealership for a quick/cheap oil change. :) Oh well, worst off I run for a while, flush, and refill. Only $19 for a full oil flush isn't bad. By the receipt it looks like they put 5 quarts of 5W30 in.
|
| Replacement driving lights recommendation | 21 Aug 2006 17:30 GMT | 3 |
I am done with the OEM cheap rusting expensive driving lights on my 95 Country Cherokee. Any suggestions on a light that will not crack, rust, and look fairly stock? Not looking for a fortune in cost either.
|
| Question on plow mounting | 21 Aug 2006 15:59 GMT | 6 |
I just bought this plow setup for my '89 YJ http://bsartist.com/plow.htm I can't figure out where one pair of brackets go. It's the relatively thin pair with a slight bend in them and an angle iron welded onto one
|
| gas gauge.. | 21 Aug 2006 15:37 GMT | 2 |
'97 jgc, every now and then my gas gauge will suddenly drop to empty. It seems like this always happens on a hot day, while sitting at a stop light. Never seems to do it while riding down the road... The gauge will SLOWLY come back up to its correct reading. Most often, ...
|
| Update to Canada pics | 21 Aug 2006 01:37 GMT | 7 |
I just updated the BC Canada run with some new pictures compliments of our tailgunner on that Friday. =) http://jbjeep.terahex.com/AA06/AA06.html -jenn
|
| Problems in Toledo with '07 Wrangler & Dodge Nitro | 20 Aug 2006 23:50 GMT | 3 |
The initial run of 2007 Wranglers has not been released due to quality control problems. See the story at: http://tinyurl.com/hlqyz Original URL: http://toledoblade.com/apps/pbcs.dll/article?AID=/20060817/BUSINESS02/608170346/ -1/BUSINESS
|
| 95 GC "service 4wd switch" | 20 Aug 2006 01:05 GMT | 1 |
i am hoping someone can help me. My wife's GC keeps notifing us to service the 4wd switch. What exactly is it telling us? Thanks in advance Pete
|
| 1999 Jeep Grand Cherokee Vacuum / Idle / Stalling Problem | 20 Aug 2006 00:56 GMT | 1 |
I have a 1999 Grand Cherokee Laredo 4.0L which was running perfectly until tonight. I went to start it but it wouldn't turn over. I thought maybe I hit the gas pedal when I tried turning it over and flooded it or something. I then tried starting it holding the gas pedal to the
|
| Need Details on '93 Grand Cherokee | 19 Aug 2006 22:02 GMT | 8 |
I've got an old 93 GC that I'm considering modfiying for extreme off road use. It's got the 4.0L Engine.Can you tell me: What Transfer Case Model Front and Rear Axle Models
|
| Thermostat Question 160 deg. or 195 deg.? | 19 Aug 2006 21:54 GMT | 7 |
Are there any advantages/disadvantages to using a 160 deg. thermostat versus a 195 deg. thermostat? I have a lot of knock and ping that I suspect is due to excessive temps in the combustion chamber since my timing seems dead on. The temp gauge fluctuates between 190 and 210
|