Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Jeep / August 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
4wd sensor12 Aug 2006 17:04 GMT1
I'm considering buying  1998 Jeep Wrangler. Both low and high 4 wheel
drive engage and operate correctly but the dash lights do not
illuminate.
I've checked fuses. Where is the sending unit?
jeep chrokee rear end oil12 Aug 2006 16:09 GMT3
Do these take 80W90 in the rear end ? I live in the northeast so should I use 75W90 ?
1998 Jeep Cherokee Sport has lost dashboard power12 Aug 2006 15:29 GMT2
My 1998 Cherokee Sport has lost all power to the dash electronics,
including the speedometer, lighting, and stereo. Anybody have any idae
what is going on?
96 cherokee coolant leak12 Aug 2006 12:47 GMT16
i went outside today and my jeep had leaked all of its coolant. a friend
said that it was probably the freezer valves. how much does that usually
cost to fix and how long?
updated some pics12 Aug 2006 07:20 GMT1
I added the WE ROCK Championship pictures to the web site, and also a few more
pictures from the latest Naches run.
http://jbjeep.terahex.com
-jenn
Position of window crank when window is up?12 Aug 2006 05:41 GMT12
Folks,
Does anyone know the position of the window crank (handle) when the
window is fully rolled up?  I have a Jeep TJ and disassembled both
inside door panels.  I didn't note the crank position on the shaft.
Jeep Wrangler Cuts Out, Need some advice12 Aug 2006 02:39 GMT3
Can someone point me in the right direction?
After driving an extended distance at highway speed, my 1991 Jeep
Wrangler cuts off.  At first it will sputter like I've put a bad tank
of gas in (I have ran through a couple tanks, plus put in fuel injector
CJ8 parts availability12 Aug 2006 02:07 GMT3
I am going to look at a CJ8 tomorrow morning, but I was wondering in the
availability of parts for these, since they weren't produced in nearly the
numbers that the CJ7's were. I am mainly concerned with finding body parts
that are unique to the CJ8 in case there is a need for ...
Button popped off of my parking brake handle...now it won't release11 Aug 2006 23:36 GMT13
Ok, it's 10:30 here on the Pacific coast and I can't talk to either of
my local automotive mechanic friends or my motorhead brother on the
east coast due to the late hour.  Hopefully there will be somebody on
the list who can help me make it through the night!  After work tonight
Removing Master Brake Cylinder on 1990 Jeep Cherokee (with ABS)11 Aug 2006 22:48 GMT9
I need to change the Master Brake Cylinder on my Jeep Cherokee 1990 with
Bendix 9 ABS system.
I have got a new MC and know how to do this, bleed etc.
But I would like to hear from somebody who has done this as to how they got
1999 jeep cherokee sport11 Aug 2006 22:42 GMT2
What is the normal cooling temperature for the 4.0 eng? My temp gauge
reads a little above 210 degrees. Is this ok and normal. Thank-you. 1999
jeep cherokee sport.
Transfer case question NP23111 Aug 2006 18:04 GMT4
I had my transfer case and transmission rebuilt when I got my jeep.(89
YJ  4 banger  5 Speed) Transfer case was shot. The day I brought it
home it was leaking oil. They rebuilt a cracked transfer case. I don't
have a manual, but is this transfer case supposed to use ATF, or gear
lift kit and warranty11 Aug 2006 16:23 GMT16
Friends,
Dealer told me that if I put a lift kit on my 05 tj, then the drivetrain
warranty will be voided.
Is this the truth?
Dana Powr-Lok rebuild kit?11 Aug 2006 15:21 GMT1
Anyone have a decent source?
Signature

Stupendous Man,
Defender of Freedom, Advocate of Liberty

97 TJ  clutch & starter adjustment11 Aug 2006 06:46 GMT2
is there or how do I adjust clutch pedal so starter engages ?
have been having some trouble finding sweet spot for starter to engage .
anyone have this problem and know the fix ?
thanks
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 July, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.