| Thread | Last Post | Replies |
|
| 90 XJ cps bad so soon? | 19 Sep 2006 02:09 GMT | 1 |
Hmm, the cherokee wont crank up anymore... I checked the resistance of the cps like the haynes manual said and it was no where near 200 +- 75 or whatever it is supposed to be (manual is in garage right now). 6 Megaohms from what my digi. multitester said.
|
| 1998 Grand 8 cyl 5.9 | 18 Sep 2006 23:43 GMT | 20 |
A few days ago I bought a '98 Grand Cherokee with 8Cyl 5.9 and now I see that it might be necessary to use premium gas. Bad news but is it true?
|
| Help Please - 89 Jeep Wrangler still doesn't start... | 18 Sep 2006 22:14 GMT | 2 |
I have a 89' Jeep Wrangler, 2.5L 4 cyl that doesn't start. When I try to start the vehicle, I'm seeing no spark at the plugs and I don't believe there is any juice from the starter coil to the cap. It sat for over seven years. I've replaced the plugs, distrubutor cap
|
| Rear End ?? | 18 Sep 2006 16:36 GMT | 2 |
I Have a '93 YJ I Replaced the spark plugs wires cap and roter. then few days later i was driving down the freeway and it slowed down and wouldn't go anyfaster or maintain speed i could feel something hitting the floorboard assuming it was the exhaust pipe and was kinda felt like
|
| Parts | 18 Sep 2006 14:32 GMT | 5 |
My 1995 Grand Cherokee Laredo needs a new front pipe with O2 sensor. Firestone quoted me some rediculous price like $569 or something. Is there a cheap web store you guys can recommend? maybe I can buy it and have them install it or something, what do y'all think?
|
| Replacement Seats in a CJ | 18 Sep 2006 14:30 GMT | 7 |
Ok got a few bucks and the boss (wife) says I can finally replace my junkyard seats in the CJ7. I'd love to get the Mastercraft seats but I've got to be reasonable....... I'm Looking at Bestop trailmax pro reclining seats but not sure about quality... I have no complaints about ...
|
| 1999 Cherokee Immobilzer Problems | 18 Sep 2006 03:34 GMT | 1 |
I have a 1999 Cherokee where the immobilzer light came on while I was driving. This had no effect until I had stopped the car and tried to start it again. Then the immobilizer wouldn't recognise either key and the motor stopped after a couple of seconds of running. Got the
|
| Help diagnose this noise 2 | 18 Sep 2006 03:23 GMT | 8 |
Hi group, I own a 2000 Jeep Wrangler 4.0 Automatic with about 70K miles on it. After a period of driving at slightly heavier than normal engine load on hot days, a knocking sound starts coming from the engine
|
| ABS Light | 18 Sep 2006 03:12 GMT | 4 |
Can anyone advise why my ABS light should suddenly illuminate and what I need do Many Thanks
|
| 1990 wrangler 4 wheel drive vacuum line? | 18 Sep 2006 02:18 GMT | 30 |
I have a 1990 Jeep Wrangler who's vacuum lines have been disconnected. I need help sorting them out as to what goes where. I think I have most of them connected properly but my 4 wheel drive light is on, but when you ramp up the rpms it goes out. I just need some help getting the
|
| What tools do I need? | 18 Sep 2006 01:38 GMT | 13 |
I have recently put on an adjustable rear track bar on my 4" lifted TJ, and had to take off my upper rear adjustable control arms to get some other stuff adjusted. When they were off a friend who was watching/helping screwed them all the way down so now I'm having to find the ...
|
| tsb number, description.. | 18 Sep 2006 00:48 GMT | 2 |
The plastic 'soft' cover on my front door panels is separating from the door panel. I remember a tsb on this, my dealer states the entire panel would have to be replaced. I know I saw something on this somewhere....I have a '97 grand cherokee.
|
| 1993 GC Limited - I Miss My Jeep!! | 17 Sep 2006 22:45 GMT | 42 |
First off, thanks to Mike Romain and DougW for thier input and help previously. It's been a while, so if you do not remember, that's cool. Doug might remember putting up pictures I posted on his website of my post-accident '93 GCL (red).
|
| 01 Cherokee factory manual | 17 Sep 2006 19:13 GMT | 2 |
I have an 01 Cherokee. My opinion is that this is an attractive vehicle because Chrysler did not design it. Does nayone have any advice on how to acquire a factory service manual for it?
|
| woo hoo! | 17 Sep 2006 15:47 GMT | 4 |
Well, that was easy. Finished off one more of the jobs that needed to be done on the ZJ. The inner right drag link ball joint (the one that connects the tie rod to the drag link) was shot. It was making ye old standard sucking
|