I'm looking for a scanner, finally. Does anyone know anything about the
AutoTap PC based system?  As opposed to just spitting out a code, I like
the displays on the PC screen...comments?
TIA,

Would any one know what caused this(mike)?
 87 yj 2.5 Strange back fire at 2300 rpm's been doing since i droped in
this engine. Been about 5 years. The other day out driving it back fired
and just lost power and died. Didnt want to start back up either.

Whats the care and feeding of soft top windows in below freezing weather...not below
zero, just below where water turns to ice and sticks on everything.
-jenn

have a 88yj
I'm getting water in the breather assembly.  It is a considerable amount
in 2 days of driving, probably 1/3 cup.  I have dumped a large bottle of
stuff that is supposed to absorb the water into gas tank.    Other than

Group,
Below is a code for $5.00 off your next $50.00 order at
http://www.ncphobbies.com/
Enter the following code in the shopping cart when you check out:

I'm a jeeper here in socal.  Just wondering if there are any jeepers
here that would like to come along on photo trips.  I'm looking for
other folks that are seriously into landscape photography.  I usually
like to work alone, but the danger factor is reduced by having another

OK - I've been here before on this:
1983 CJ7 - stock factory "roll bar" (aka 'sport bar') with stock-style
front seat belts (retractor /inertia reel mounted to side of tub at
rear of door opening, etc)

I have a 1953 willys jeep the number on the title is 4J16475 or it is
4JI6475 can any one tell me what model etc this is?? I need to get
parts of all types but need this info first. I was told the 475 stood
for 4X4?? as for the rest not sure. Please advise.Thanks.

86 258, carter bbd, nutter bypass (distributor controlled by ported
vacuum)
been working hard to achieve the near-mythical performance from this
engine that mike romain describes in his comparable rig: namely third

I'm in the process of replacing the front shocks and springs in my '96
Grand Cherokee Laredo 6 cyl. As part of this repair I was planning to
replace the front stabilizer bar bushings.
I bought a bushing kit and reviewed the procedure in my Haynes shop

Well I finally had to do it, after 3 years of running with nothing but the
soft top I had to put the hard top back on..... I was closing up the
passengers side window insert the other day and all the stitching along the
top just ripped right out.  It had been going in little ...

we have a 2000 jeep grand cherokee with 85k. while driving down highwa
at 70 mph the suv just shut off. we coasted to birm and sat for about
min.  it started up and we drove to our destination which was about
miles away.   car sat approx. 1 1/2 hrs. started up right away n

Hummer Off-Road Course Sponsored by GM
http://video.google.com/videoplay?docid=-740597318538281042

I'm hoping some of you XJ fans can offer some suggestions on a problem that
just happened to me today for the first time.
First of all, the specs: 1989 Cherokee LTD (XJ), inline 6 cylinder, 4 litre,
with 150k Km's (ie: relatively low mileage, or more accurately 'kilometerage'

Can someone please help me im a single woman with noone to ask about
this throttle position senser for my jeep. I got the part, now is it
something I can fix? Where does it go?