Twas the night before Christmas
He lived all alone
In a one bedroom house made of
Plaster and Stone

Hi, I'm new to the group, but my dad and I both have jeeps. Will
Wrangler tubs swap over with cj tubs, i have 2 83 CJ's and 1 85 CJ , my
buddy has a 93 wrangler for parts, he said I could have the tub ,I'm
not sure if they interchange, could somebody let me know.

Does anyone know if Chrysler parts make a repair kit for the dooor stop on
this truck? Mine is broken and allows the door to swing all the way around
till it hits the front fender. Looks to me like somekind of larger plate
bolted in place would work. Any ideas?

I am wondering if a 2000 wrangler or 1996 Cherokee would have them (and
whether they can be turned off). Just read a story saying that the
auto's manual won't tell you if you have them, but that basically any
car with an airbag does have them.

'97 GC, I6.  I need to replace the o-rings in my oil filter adapter.  What
size is the torx bit needed to remove the bolt?  A 55 feels a bit to small.
thanks
cal

Santa (clevery disguised as my girlfriend) came a day late last night and
brought me a Craftsman 4pc 19.2V cordless set. It comes with a 5 1/2" Skill
Saw, 1/2" drive drill, Sawzall, flourescent lamp, two batteries, a charger,
and a tote bag big enough for it all.

I have a 2000 TJ that has a vibration around 60-70 mph that comes and
goes.
The dealer inspected and I have metal in the oil and they recommend new
rear-end bearings in a rebuild of the Dana 35 rear end for $800.00

Does anyone know how to take off the flexible cover that is just above the
sunvisors on a 05TJ?
I need to see what is going on behind this where the wires run from the auto
dimming mirror.

http://tinyurl.com/ygubrf
Coasty

just put new clutch fluid line on do i need to bleed clutch? if so how?

Hi,
I was wondering if somebody could tell me what tools I need to replace the
pads on my front discs.
I have a '98 Grand Cherokee, and I'd like to make sure I have the right

Merry Christmas everybody.
Best wishes for the Jeep community!
I got my Jeep dirty for the first time... Now I think I broke it! :)
Just kidding!

   I first started this topic in Sep. 2003.  I've only today, Dec. 29,
2006 gotten to this because it failed inspection for the pointer not
lining up.  For the benefit of anyone trying to align their shifter,
I'm going to post some pictures on my website

Hello group,
I've got a '99 XJ 4.0 Auto with just shy of 100k mi. that's developed a
problem lately. I've googled all the idle problem links and have done all
the T-Body cleaning steps to no avail.

My 99 Wrangler appears to have developed a sag in the rear end...kinda like
its owner, but thats another issue all-together. Really noticed it driving
in the fog the other night, the headlights pointed up. This appears to be
related to the addition of the hard top. Looking for ...