While off-roading this weekend the '95 Wrangler developed a slow
scraping sound that sounds like sheetmetal edges rubbing past each
other (low pitch).  It happens only while going downhill and braking
with the engine.  It happens in and out of 4WD and on paved and unpaved

Hi all.  I have a 2006 Jeep Wrangler that has 2200 miles on her.  She
has a 6 speed manual tranny.  Anyone else have problems shifting first
thing when starting up your jeep?  All gears shift fine EXCEPT from 1st
to 2nd.  This seems to shift a little "clunky" and stiff until I have

Question on back space 33x12.5" x 15" for Rubicon.  What is the best
back space on the 15" rim?  I want to go as far under the fender flares
as possible without rubbing or scraping on control arms etc.
BTW, its a 4.5" RE lift.

Hello. Could someone please tell me whether the axles from a 78
Cherokee would fit on my 95 YJ w/o any modifications? I am interested
because they are the Dana 44 axles.
Thanks,

I have a occasional leak from where my steering box meets the pitman
arm. It seems only to leak sometimes, but other times it won't (maybe
the degree the steering wheel is at the time..? who knows). I'm
probably due for a new seal for where the pitman arm attaches to the

My 2005 Rubicon Unlimited has developed a annoying rattle at low speeds. It
is real bad when turning left, the sound seems to come from the right front.
I jacked the front and checked u-joints (both sides) they seem fine. I also
checked for loose shocks. I tried holding the ...

To the idiot, Go post your crap somewhere else low life scumbag.I'd like
to punch you in the face for posting such crap on this great site. Any
how could you just F&%* OFF>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Have this left over from former car. It is AM/FM, no cassette or CD. Just
want to see if anyone needs it. You pay shipping cost only. Let me know.
Alan K.
kajak9@comcast.net

I'm looking at an '87 YJ for a project jeep.  (I already own a '93 that
I drive everyday.)  It's a 6 cyl., but it has an automatic.  How much
trouble would it be to swap out the auto for an AX-15?  Or some other
manual that would work more easily?

Greetings. I am looking for a set of used tires for my Wrangler.
Something close to the stock size that came on it, or a little larger.
I would trade a decent set of BFG A/Ts 31x10.5x15 for them. My tires
are in great shape. I drive 40 miles one way to work everyday and

Never climb concrete at an angle. always straight on. I went up a 5"
slab to get somewhere and I wasn't going slow enough (20mph) and not
head on. I approached it frm the driver's side at a 45 deg angle and my
passenger side stabilizer snapped at the top where it connects to the

Well after chasing many leaks on my 95 YJ, a new one has sprung. I am
getting two drops of fluid under the mid section. The bolts that secure
the seat belt clips to the floor have fluid on them and are dripping??
Are there brake lines in that vicinity that I cant see? It is not gear

This line is printed on my insurance records. So, according to my
insurance company, real jeeps do have square headlights!

So I'm elbows-deep in pulling out my radiator and water pump from my '88
Jeep Comanche (4.0l, if that matters), and as I figured was likely, two bolt
heads broke off.  I've got pictures, if you care to see
(http://members.shaw.ca/cneufeld/Images/Truck005Small.jpg).  They're ...

I am currently building a 1980 CJ5.  I want to rebuild my T176
transmission as well as my Dana 300 transfer case.  I realize that I
will need a shop press to do both of these jobs, plus I'd just like to
have one around for general use.  What size do you guys recommend I