| Thread | Last Post | Replies |
|
| check engine light | 04 Jan 2007 05:24 GMT | 6 |
I had my 2000 Ford Explorer Sport in the garage in July. After almost $1500 in repairs,maintenence and new tires, turns out the check engine light was on because of a faulty O2 sensor. The receipt says something like found O2 sensors and valve to be bad, neccesary to replace
|
| 87 YJ again.... | 03 Jan 2007 19:03 GMT | 10 |
Well Jeep people, My 87 YJ 4cyl. is hitting me again!!!! I can drive it once per day and as long as I leave it running it is fine but, as soon as i get to where I'm going and shut it off, restarting it isn't bad but it doesn't idle as good and it dosen't have the same power it had. ...
|
| Ignition Linkage | 03 Jan 2007 16:15 GMT | 3 |
The ignition switch linkage on my '84 CJ-7 has gone from worn to worn out. The gear on the end of the key switch and the gear on the end of the linkage rod are no longer mating correctly. The gears slip when they meet resistance i.e. when you hit the start position on the switch. ...
|
| Cabins in Death Valley | 03 Jan 2007 14:16 GMT | 1 |
Does anyone have a list of GPS waypoints for cabins in Death Valley. I am planning a trip this weekend to death valley. Does anyone know where this cabin is? You can send me a personal e-mail.
|
| NYD07 Pics | 03 Jan 2007 04:05 GMT | 2 |
http://jbjeep.terahex.com/NYD07/NYD07.html Please remember that the server has limited bandwidth so if you can not get in, please try again later. Thank you. -jenn
|
| Waiting for BFG AT KO's | 03 Jan 2007 00:58 GMT | 9 |
There isn't one store with 4 around here. I've got 2 places trying to scout out 4 nice round ones... Happy Holidaze!
|
| new pharma sites | 02 Jan 2007 23:10 GMT | 1 |
Good afternoon. Fresh batch of poopers related to http://www.spamhaus.org/sbl/sbl.lasso?query=SBL46514 Using DNS HORNETYFF.COM
|
| 91 hard top on 81? | 02 Jan 2007 23:09 GMT | 14 |
Going to look at a $500.00 91 YJ tomorrow, guy had it up for sale for 3 grand, but he parked one day and left it in nuetral, rolled and smashed it up a bit, said it is still drivable. Anyway I busted a window and part of my hard top out of my 81 CJ7, will the hard top off this ...
|
| Tilt steering repair | 02 Jan 2007 22:40 GMT | 35 |
I'm working on the '92 Cherokee trying to fix the loose steering column/tilt wheel. You guys were right - it's amazingly hard to get to those three bolts to tighten the tilt wheel. I have the steering wheel off, now I'm staring at the steering-wheel-ignition-lock-thingy - the
|
| squilling ?? | 02 Jan 2007 21:49 GMT | 9 |
for the past week ive been hearing squilling under the hood. had them replace the belt and it still happenes... not all the time... usually if i put the clutch in it decreases.. then today it didnt squill at all... any ideas.. its a 1994 Jeep Wrangler. 150,000 miles.. cluth and ...
|
| Happy New Year Folks! | 02 Jan 2007 18:02 GMT | 17 |
Happy New Year Folks! All the best for all of you in 2007! Cheers Ry
|
| Tail lights and dashboard lights not working | 02 Jan 2007 15:55 GMT | 2 |
First time *REALLY* asking for help here. I have a 90 Toyota Celica and my dash board lights and tail lights are not working. While driving sometimes they turn on for some time.I have checked the TAIL 15 A (controls tail light, parking lights, licence plate, instrument panel
|
| darksiderz.co.uk | 02 Jan 2007 05:24 GMT | 2 |
Does anyone know what happened to "www.darksiderz.co.uk"? I used to access this site for some very useful information but it seems to have now disappeared. Any suggestions as to what I'm doing wrong, or has this web site been taken off the web?
|
| Manual Transmission Problem | 02 Jan 2007 01:57 GMT | 3 |
I have a 2000 Wrangler with a 4 liter and manual five speed. I'm the second owner and the first owner was a nurse that used the jeep as a highway commuter car. The jeep has not been wrecked, rolled, or ever stuck. Over a year ago the reverse lockout pin was found (broken) while ...
|
| AX-15 transmission case does not separate | 01 Jan 2007 01:28 GMT | 4 |
I am trying to disassemble a 2WD AX-15 to rebuild it, but have ran into a problem where I cannot separate the transmission housing from the intermediate plate. When I did this on another tranny, the plate came off just fine after a little prying and some hits from a deadblow
|