| Thread | Last Post | Replies |
|
| air compressors | 21 Jan 2007 18:14 GMT | 2 |
went and bought a new air compressor from lowes the 45gallon job 220 volt cast iron pump 3 year warranty(limited) very loud and noisy call company they ask if i c bolted it to floor with their install kit and i say no
|
| 93 Jeep Wrangler - 57K miles - fails CA smog | 21 Jan 2007 16:51 GMT | 14 |
My Jeep Wrangler failed the smog check (for CA) again this year. Two years ago it failed with NO of over 1000 (at Test Only) and the max is 517. The repair shop said I needed to fix X things: new radiator, new pump, new cat converter, etc. I paid almost $1100 and it was still
|
| cleaning soft top | 21 Jan 2007 16:23 GMT | 13 |
Anyone know whats the best thing to use to clean the clear plastic on a soft top??
|
| 2004 Unlimited Hard top conversion problem with rear defroster | 21 Jan 2007 16:13 GMT | 1 |
Ok I have a problem. Bought a hard top and wiring harness for my Jeep Unlimited. I followed their picture diagrams for the wiring harness install. Wipers work on the rear window but the defroster doesn't. It doesn't even appear to have power. I do have a spare 10 amp micro ...
|
| Cool Car Insurance Compare Site | 21 Jan 2007 15:34 GMT | 1 |
here is a cool comparison site to check if u are over paying for car insurance http://www.car-insurance-comparison.net if it saves u money post how much is saves here
|
| 95 grand cherokee 4.0 inline 6 | 21 Jan 2007 03:03 GMT | 2 |
i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now for some reason its runnign rough. is there anyway the timming jumped just by changing the manifold. if not, any suggestions why it might be running rough. it was intitially kind of hard to get it started ...
|
| Haynes Jeep Wrangler Repair Manual 1987-2003 | 21 Jan 2007 01:10 GMT | 11 |
I've got an '04 TJ I6. I don't intend to do any major repair work, but I want a reference to help diagnose any problems I might have down the road. This manual goes up to '03. How much will I be missing? Or will it be "close enough for government work"?
|
| gauges radio domelight & lighter stop working | 20 Jan 2007 20:59 GMT | 3 |
Hay I got a 1997 sahara and all gauges stop working along with radio dome light and lighter still have dash light and low fuel light and turn signals flashes but none of gauges everthing stop at same time.Pulled dash out and worked with pins in plug no help.........Can anyone help ...
|
| Ignition Switch Won't Turn | 20 Jan 2007 20:56 GMT | 9 |
2000 Jeep Cherokee Classic My ignition switch won't turn. This has been an intermittent problem that would be cured with a few jiggles and twists, but now it seems to have become a permanent condition.
|
| check engine light on in 97 wrangler YJ with error code reading 72 | 20 Jan 2007 17:47 GMT | 26 |
I have a check engine light on, and the code is reading a 12 and a 72. I know what the 12 means, but could not find any explanation for a reading of 72. Anyone know what this means?
|
| 1999 jeep cherokee sport | 20 Jan 2007 16:33 GMT | 1 |
where can i get a diagram or printout location for the sensors on a 1999 jeep cherokee sport 4.0 . the haynes manual is hard to follow and the diagram under my hood is not there, due to pressure washing at some dealership. thank-you for any nformation.
|
| Weird vibration | 20 Jan 2007 03:37 GMT | 14 |
Does the drive shaft (front) rotate while in 2H, on a 95 YJ. I have vibration in the steering wheel and shifter at highway speeds. When I let off the acelerator, it stops. Thanks in advance. Greg
|
| ATTN Mike Romain 97 cherokee stuck in part time | 20 Jan 2007 00:40 GMT | 3 |
Thanks for your response even selecting gears manually under car with linkage removed does not work I now suspect internal damage within transfer case (it is full to mark of oil) if I could just get it into 2hi or 4hi at least then I could use car to find a replacement (not easy ...
|
| PING Mike Romain | 20 Jan 2007 00:05 GMT | 1 |
I saw your several replies to OP's with blower motor control switch problems so figured I'd ask you specifically. My switch stopped working a month ago. For about a week I could just jiggle it and it would work on hi, but the switch it self was locked
|
| High idle after warmed up (88 Jeep Comanche) | 19 Jan 2007 19:53 GMT | 4 |
So I had an issue about 6 months ago with a high idle (about 3000 rpm) immediately on start-up. That was rectified by taking out and cleaning the IAC; life was good. Now it idles fine on start-up, but after the engines warmed up a bit (5
|