| Thread | Last Post | Replies |
|
| help rear window replacement | 01 Feb 2007 23:45 GMT | 2 |
can the rear window be replaced in my 89 cherokee 4 dr liberty with
one from a 90 or 92 or 96?
thanks
brisnoon
|
| TIG Welding on a TJ | 01 Feb 2007 23:31 GMT | 24 |
I was planning on moving the coil spring perch's on the Dana44
on the back of my TJ to bring them back level under normal
circumstances, due to a suspension lift then arm adjustments to
realign the pinion angle. I am planning on using my TIG it has HF or
|
| bearing press | 01 Feb 2007 22:17 GMT | 13 |
I met a guy at Auto Zone today who's selling a bearing press for $150.
Apparently, it's pretty old and very hefty.
Most of you guys have a good idea of my level of expertise - would this
be a smart purchase, if only to have around for later when I learn what
|
| 90 Wrangler YJ needs Rear Main Seal | 01 Feb 2007 18:20 GMT | 16 |
Ok,
I'm hoping to get some quick advice on replacing the rear main seal in
my 90 wrangler. I've got the 258 - 4.2L engine with manual
transmission. I've been trying to determine where my oil leak is and
|
| Cherokee Heating problem | 01 Feb 2007 16:48 GMT | 8 |
My son has a 1994 Jeep Cherokee and the heater has stopped blowing
warm air. The A/C works fine; however, when he switches it to "heat" -
only cool air comes out.
There doesn't appear to be any leak in the Heater Core - Since I'm
|
| 2002 Jeep cherokee rear bumper will a 2000 bumper fit?? | 01 Feb 2007 14:19 GMT | 9 |
I'm replacing my rear bumper on my 2002 grand cherokee and can buy a 2000
one, will it fit ok?
Thanks in advance
Harry Palmer
|
| need a softop.... | 01 Feb 2007 11:42 GMT | 12 |
when i bought my jeep 6years ago it had a softop.. but need to be replaced
.. i bought a used hardtop.. noisy but does the job... but now that
summers almost here i want to get another softop.. but need all the
hardware.. i know theres a few different ones on Ebay.. I've always delt
|
| Best online resource for Jeep Parts? | 01 Feb 2007 04:19 GMT | 4 |
What is the best resource for aftermarket Jeep products on-line?
Thanks,
Chris Maness
KQ6UP
|
| 2000 Cherokee Liftgate Ajar | 01 Feb 2007 03:58 GMT | 3 |
My liftgate ajar light stays illuminated on my dash and the liftgate is
seated properly.
Is this an easily serviceable issue? Could it be a loose wire in the
latch mechanism? Thanks for your help.
|
| Powder coated Hinges | 01 Feb 2007 02:17 GMT | 6 |
Hello I have a 97 TJ and have rust on the hinges. I have tried
repainting them but the salty roads just make the rust come back. I
want to replace them with something powder coated to resist the rust.
I want something black, as the jeep is white so chrome looks tacky.
|
| LOVE this set up | 01 Feb 2007 02:02 GMT | 1 |
Mickey Thompson classics with a 4 inch lift.
Man I wish I had $2000 to blow on this s#1t
http://www.roughcountry.com/Graphics/LargePics/Jeep_TJ-4in.jpg
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread