My 1997 JGC's windows/door locks (operated from a console on the
driver's door) all went kaput at the same time .  Fuse or something
else?
Thanks

What is the correct procedure for adjusting the parking brake.o5 liberty 4x4

This is a strange one, I get a rattle when music is playing (not loud)
all of the
sudden on the drivers side door, it almost sounds like a rattle in the
dash, but

I'm in Ireland, with my Cherokee Jeep.. and have to pay an enormous slug of
cash for road tax - around 1400 Euro.  This would be cut dramatically if I
had it converted to "commercial use" .  Which seems to involve replacing the
two rear side windows with some sort of blanking ...

On a cold and blistery Michigan night, I spent last night putting my
TJ's front right steering knuckle back together, after having to drill
out a broken caliper bolt. . and I just had to ask, how many others
have forgot to install the spash-guard after bolting down the 3 hub-

I may get a Dana 30 out of a 95YJ for my 91 YJ.
Can I use the calipers from my 91 on the 95 axle?
Also does the 95 have the larger TJ style axle ujoints?

Every day thousands of Americans default on their car loans or lease
payments... as a result, their new or almost new cars get repossessed
by the financial institutions and auctioned off in a hurry, because
the cost of storing the cars outweighs the banks' ability to try to

Anyone know of a good chemical to clean out and engine when you change the
oil?? besides just new oil....I have a 93 cherokee with 225k on it and
wanted to maybe get rid of some sludge build up inside.

Hey guys,
looking to change out my plugs in my Jeep.  Any issues with working
with the coil pack?
Haven't attempted these before....so I don't want to get half way

I've been browsing the web for days trying to find what's wrong with
my backup lamps which are not working when I back up. I've cheched the
whole circuit up to the neutral safety switch (I have an AW-4
transmission) - the reverse switch is acting okay when reverse is

In re-installing my steering knuckle, I'm reading through the
installation process of the the whole thing, and noticed the warnings
about avoiding damaging the oil-seals. If I am careful in lining-up
the axle-shaft when re-inserting into the differential, is there much

I've got a Mopar 60 Gold Series Battery that appears to be worn out and no
longer holding a charge. (600 Cold Cranking Amps, 5 Year limited warranty,
CAT # 34-60, Part # 04364944)
This battery is a little less than two years old. Does anyone happen to know

TJ Castle-Nut Size for Upper and Lower Ball Joint on Front Steering
Knuckle...Anyone know what it is? I need to get a socket on the way
home at lunch and finish taking my steering knuckle off..
Thanks!

For the XJ, I'm planning on following the budget boost writeup at:
http://www.rocklizardfabrications.com/home_brew_budget_boost.htm
It says to use ZJ V8 springs.  I've been looking at them, and it seems
that they used the same springs for both the 4.0L and the V8 -

Looking for a fiberglass or metal lift-gate for CJ hardtop.  New or (no
rust) used.
Anyone know where to get one? Besides the (frame only) one on eBay for $169