| Thread | Last Post | Replies |
|
| Noisy new 2006 Wrangler TJ | 21 Feb 2007 16:16 GMT | 3 |
Hello all. I just have a quick question that I hope someone can put to rest. I have a 2006 Wrangler with 5000 miles on it that I bought brand new. For the first few thousand miles, I didn't hear any noises out of the ordinary. However, lately I have been noticing a faint
|
| 97 jeep grand cherokee abs issue | 21 Feb 2007 16:04 GMT | 14 |
my jeep has a code 30 on the abs (pump motor circuit bad). we have done diagnostics on the system and have come to the conclusion that the CAB is the problem. (hotwired the pump and there's nothing wrong with it and traced and tested all wires - again, nothing wrong). would there be ...
|
| Bumper Air Tank Pictures | 21 Feb 2007 14:03 GMT | 5 |
I've read a fair amount of information about people building air tank bumpers, but, what I haven't seen is any good pictures that show what the finished project looks like. I've got a 1984 CJ7 that really could use some new bumpers (among other things). I've also got a
|
| Europe Tests Established Chemicals on Millions of Animals | 21 Feb 2007 04:08 GMT | 17 |
Tony Nottingham England 15 February 2007
|
| longest-running Jeep dealership in the world | 20 Feb 2007 15:13 GMT | 1 |
Corwins is the longest-running Jeep dealership in the world February 19, 2007 By PAUL GIANNAMORE, Business editor The Herald-Star - Steubenville, Ohio
|
| PHX mechanic | 20 Feb 2007 15:12 GMT | 2 |
i'm looking for a mechanic in paradise valley area (or relatively near there) that is good with CJ5s. the last guy i tried took nearly 2 weeks to install a carb. any recommendations?
|
| Attn: Bill or Mike | 20 Feb 2007 14:39 GMT | 3 |
I have a neighbor who needs a link to the CJ blower upgrade. Do you have a link handy?
|
| 93 jeep cherokee clutch soft | 20 Feb 2007 05:31 GMT | 7 |
I have a 93 jeep 4.0 5spd when I push in the clutch it won't disengage the clutch until the very bottom and reengages right away. If i out driving it hard the fluid level falls and i lose clutch but i can't find a leak It has a new master in it any help would be great
|
| schackle reversal | 20 Feb 2007 04:17 GMT | 2 |
Is this a good idea on a 95 wrangle with 5 inches of lift? what kit would you use? bolt on or weld? thanks
|
| posi lok | 20 Feb 2007 00:39 GMT | 3 |
hey i think my 95 wrangler with the posi lok is stuck in the lok position. what are the instructions for the install. how do you check this? is the 4wd light on the dash switch off this? thanks
|
| D-C might become just D and C. | 19 Feb 2007 22:12 GMT | 65 |
http://www.bloomberg.com/apps/news?pid=20601087&sid=aP11gqnZskmg&refer=home Selected highlights: <q> DaimlerChrysler AG may sell or seek partners for its unprofitable Chrysler division, abandoning its vision of building a successful carmaker
|
| Dead Battery (Alternator?) 1997 Jeep Wrangler... | 19 Feb 2007 22:07 GMT | 12 |
Let's see if I can find anything out here that will help. This will be a lot of information, maybe too much. Ok. About a year ago, someone tried to steal the battery from my car.
|
| DaimlerChrysler to auction off Chrysler | 19 Feb 2007 18:37 GMT | 2 |
http://custom.marketwatch.com/custom/excite-com/news-story.asp?guid={E567B891-0C AF-4667-B719-7759BA6716E4} Daimler Chrysler is set to launch an auction for its Chrysler unit as early as this week by sending information on the struggling division to several potential bidders, ...
|
| shackles height | 19 Feb 2007 18:13 GMT | 1 |
95 wrangler what is the stock shackle length?
|
| Front U-joints | 19 Feb 2007 14:47 GMT | 29 |
I was going to change my u-joints on my 05 Rubicon (70,000 miles) and after removing the rotors there are some male torx type bolts that need to come out next. My question what is the proper tool for these? Is some type of axel puller also needed to get the shaft out? I have a ...
|