I have a 85 Jeep Grand Cherokee.  My tranny line is leaking at the
joint by the cooler which leads me to believe I need a new plastic
clip.
The clip looks like this:

I need to replace the clutch in my TJ.  Any recommendations for good
aftermarket brands?  I need something strong that will hold up for another 8-9
years!  Thanks.
-jenn

can anybody point me to replacement headlights
for my stock 2000 TJ ???
i know nothing about headlights
except that i do like that blue/white light

This is my first winter with my Liberty diesel.  It never hesitates to start
immediately after the glow plug indicator goes out.  My only concern may be
totally unfounded, but I thought I'd ask this newsgroup:
Noisy as it is at cold start (and using B10) I've noticed that since the ...

Have an 01 Cherokee that i want to add foglights and auxiliary led
lights to.  Opened up the dash and there is a pigtail to plug into the
stock foglight switch behind the blank in my switch bezel.  Pigtail
seems ot have power as the back light to the switch comes on with the

I am new around this discussion, so forgive me if this information has
alreay made the rounds.
Whenever I am around car people, folks are always arguing about oil
filters.   If you have an interest in learning more than you ever

"They can't make and engine or transmission that last, and people who
work hard for their money are shopping around"
That's a quote I heard on the radio this morning.
Is this true about Jeeps? Are Jeep transmissions not lasting? It seems

OK - 1983 CJ7, essentailly stock as least in terms of the electrical &
wiring.
I took the grill and radiator out recently while replacing on the PS
gearbox which meant disconnecting headlights, turn signals and etc and

Just a quick note to explain my absense.  I met a girl who drives an '02
Grand Cherokee, and we've become the best of friends.  Had it not been
for our mutual interest in Jeeps, it may not have happened.  We're off
to the Sierra's this weekend to play in the snow in the TJL.  ...

http://s33.photobucket.com/albums/d96/carlsaiyed/
A few new house pics! I'll take more of the 99% finished product on Monday!
Carl

I'm rebuilding the carb on the '81 exArmy CJ5. It's the Rochester E2SE and
my vacuum test show the mixture control solenoid is caput. My delema is that
I can not find this part under $85 and as there might be other problems when
the rebuild is finished (I'm no expert here I might ...

OK, I am new to all of this. I have a TJ with factory installed soft
uppers. I need to replace the skin on the front drivers side. I have
found several skins but they do not come with the metal frame. Is
there some way to get my factory installed frame out of the skin? It

Finally finished the dashboard. Took forever but now all my gauges work as
well as indicators, idiot lights everything.
I've posted pics if you are interested.
http://photos.yahoo.com/harrisfam1988

I removed the rear seat on my '04 TJ and when I pulled up the carpet to
remove the center seat belts and bracket I found what appears to be a
huge torx headed bolt holding the assembly down. I've got a few torx
screwdrivers, but this is way larger than anything I've got. I ...

My coworker's cousin has a JK Unlimited Rubicon and he let me drive it
last night.  I can't say I was disappointed, although it was way too
nice inside for my taste.
It has an auto tranny, he said he ordered a six speed first, but it was