I just replaced the alternator on my 95 cherokee country edition and
have a wire not connected to anything.  Cant find the mate for the
plug.  The wire is the large black wire that is on the top of the
alternator, the one you have to screw in with the big plastic shield.

I have a 97' Jeep Grand Cherokee Laredo.  It runs great and I have never had
any problems with it except for the dash lights and display lights.  If I
leave the dimmer on anywhere, except for the low position, the lights will
dim down to the low position and back up to the position ...

Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
everything off to do it, but can't get large gear off, they both slide out
easily about 3/4" then large one stops dead, you can acually slide it back
and forth making it clunk. We have Hayne and full shop ...

2000 xj .....see the switch shorting out when trying to use it.....any thing
on trying a do it yourself repair ??  Thnks to all...

Taking the kids out in the RV to do some fishing.  Figured I might as
well pull the TJ along with it.  Anyone know of any 4 wheelin near the
area?  Might even make a long haul to Pismo after seeing Merg's post.
Nice.

I have a 95 YJ and I want to remove the step/flare beneath the door,
and put on some aluminum diamond plate. Anything I need to know before
I bolt it on? Anything to help prevent future corosion in that area.
It is solid now, no rust, but I don't want to give it anyplace to

Anyone have any experience with Kumho tires? Specifically LT225/75R16
VENTURE AT KL78 OWL E. I have a chance to pick up 4 for $350 plus $90
shipping. Or should I just stop being cheap and get the BFG All Terrain
 A/T KOs (same size)?

having seen your Pismo Beach pictures upwards of 1000 times, I thought
this might interest you:
http://www.pirate4x4.com/forum/showthread.php?t=567301
You might know about it already, but just in case.

This is a silly question, I know. I'm in the army, and I'm overseas in
Germany. I just purchased a new 2007 Jeep wrangler from military car
sales AAFES. Its a hard top, and looking at some photos of the hard
tops, they appear to be sectional. Is that a new feature or are the

Does anyone know how to wire a harness for trailers on 07 wrangler.  I
was told hard wire it to the rear lights?  Thanks in advance

Ok, I knew that there had to be a reason they call it Jiffy LUBE, but
I really didn't know why. It seems that my service manual for my 1992
XJ requires that certain chassis parts be lubricated with grease. I
didn't know really, my dad was a computer geek and 40 hours a week so

Hello.  I have a 2006 Wrangler X that I would like to lift.  I am
totally clueless and I don't know whether or not I need a  body lift,
suspension lift, or both.  I do know I do not want more than 2 or 3
inches for a lift.  Here is what I am looking to achieve:

i am loosing oil in my 4.0L-im not sure how.  i had 5w30 in it for a
while, and it leaked around the drain plug, but i switched to 10w30
synthetic blend and that helped the dripping a lot.  the side of the
block is covered in old oil, and my mechanic friend thinks that the

I have a 93 jeep cherokee, I have had the front end inspected, the upper
driver side ball join replaced. I got the front end aligned.  Now the right
front wheel toes out at the bottom, I do have a broken stabilizer bar
bushing on the right side. What would cause the wheel to ...

I have a 97' jeep grand cherokee that won't turn over. When I go to turn it
on the lights inside come on and dim. I hear a slight clicking but no luck. I
have no idea about cars can somebody please help me out with a suggestion as
to what the problem might be?