I was tinkering with the Jeep and debating whither I want to tackle the
harmonic balancer today (no, I don't have a pusher and HATE messing with
 those things, I've had nightmare experiences with them on
Studebakers), it will wait (I hope) until next weekend and the right tools.

I hope someone can help!!
I've got a Honda Accord (99) which i had converted to gas a year ago.
When I drive the car in petrol mode, its fine and never cuts off. But
when I drive in gas mode, its fine for a few days, but then the

95 wrangler with the four banger.  the muffler is toast.  need a cat
back.  who has the best? is stainless worth the price?
thanks

"President Bush told a crowd of auto workers on the outskirts of
Kansas City Tuesday that the hybrid vehicles they make are fitting
examples of the fuel-efficient vehicles he hopes to see filling roads
in the future.

does anyone have the bull bar for the grand cherokee ZJ?  i am making
a homebrew front bumper, and i need some ideas for the mounting of the
bumper.  if you have pictures of the parts used to mount the bumper to
the frame, or just pictures of the areas that it is mounted to, that

Hello all first post here.....
I have been having some issues with a whirring noise in the rear end
of my TJ.  I assumed that it was the transfer case so I tore that down
and opened it up and found no issues.  So upon further inspection I

I know there are some of you floating around with Liberty's that have been
recalled because of lower ball joints that may fail.
This recall was announced on 8/1/06, and the recall began on 9/11/06. My
wife did not get her recall notice until the middle of March, more then six

In all my years of driving I thought I've had everything break that
could, but now have a new one.
For the past few weeks I've been hearing a new noise from my engine, and
I'd pretty much convinced myself that it was the bearing in the AC

Seems like every spring I have to recharge the air condt system. I'm
wondering if a can of the dye would help in spotting the leak. The
evaporator was replaced by Jeep two years ago. Is a leak usuall du to
bad O rings in the compressor?

I have the Haynes manual and see where it describes replacing the steering
gear but I find no instructions for filling it with oil and adjusting it to
remove free play from the steering wheel. I can remember doing this before
but I can not remember how I knew what to do - I guess ...

my  '06  tj    with 5000   miles on it .....and the brakes are  pulsating
......is this  a  common problem  .....don't want to turn the rotators  this
early.....maybe its under a  recall or warranty      thanks

i have a 231 tcase apart on the bench it needs shift sycro's and takers
for a small fee??

The oil pressure gauge on my Jeep Wrangler has been reading lower than normal for the past several
months. It works okay but the readings are roughly 20 percent lower across the board than I would
like to see. I have plans to check the pressure with a real mechanical gauge before ...

Every month thousands of cars become government & bank property
through various seizure/surplus laws. Because of the constant influx
of vehicles and the enormous expense to store them, the cars must be
sold fast and cheap! Buy direct from the sources and save

Like a idiot glutton for punishment, I bought another Jeep:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150101747837&ssPag
eName=ADME:B:BCB:MT:31
       God Bless America, Bill 0|||||||0
mailto:LWHughes3rd@aol.com http://www.billhughes.com/