| Thread | Last Post | Replies |
|
| Barbie Jeep | 25 Mar 2007 22:34 GMT | 2 |
Sure wish I could get my jeep to sound like this one: http://www.youtube.com/watch?v=nD-nJS9gqp0
|
| remove a roof rack from a Jeep liberty 2004 | 25 Mar 2007 15:29 GMT | 5 |
I need to remove a roof rack from a Jeep liberty 2004 Has any one done this ...I spoke to a Jeep dealer and they say that the holes through which they are bolted need to be filled up and the roof repainted
|
| CJ-5 Heater Fan Upgrade Questions | 24 Mar 2007 22:33 GMT | 47 |
There were a number of posts and website reviews on upgrading the heater fan blower motor for the older vintage cj-5 Jeeps. My Jeep is a 1980 CJ-5. I have read all the posts that I can find on this, and I would like to summarize some questions that still remain for me as I ...
|
| Lockers | 24 Mar 2007 18:01 GMT | 28 |
I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC 20 rear end. I want to put a locker in it. Can someone direct me to one that will fit that axle? As well, what are the best as far as air, electric or mechanical. Also what might be the axle in front, Dana 30
|
| Snap-on tools for sale, on the bay, new!! with box | 24 Mar 2007 12:58 GMT | 9 |
http://search.ebay.com/_W0QQsassZt4613QQhtZ-1 I will be listing LOTS more in the next few weeks Thanks for looking
|
| Sorry, Greg... | 23 Mar 2007 20:49 GMT | 1 |
I sold those springs to a local guy today. However, do not despair! I have a friend in Richmond who is selling a set of 4.5" Rock Krawler XJ springs for $200. I can put you two in contact if you would like... Carl
|
| a one off jeep | 23 Mar 2007 20:00 GMT | 8 |
Custom body work, gotta check for wood rot and termites !!!! http://s174.photobucket.com/albums/w117/markd78/jeep/ Going to look at it Saturday, Only in Michigan Mark
|
| how to install a new soft top | 23 Mar 2007 16:54 GMT | 6 |
I just bought a new top for my wrangler, but am not sure if I can install it myself. Any suggestions? Is it easy or should I have someone else professionally do it for me?
|
| 19867 CJ-7 wiring diagram (schematic) | 23 Mar 2007 13:39 GMT | 29 |
I searched everywhere on the web for this thing. DOes anyone know where to find one? Thanks.
|
| Lift Kit Time please help with brand & parts | 23 Mar 2007 05:10 GMT | 5 |
I've got a 1990 Jeep Wrangler YJ. I want to be able to use 33" tires so I'm thinking of either a 3.5" or 4" lift. Obviously when ever I look at different sites, the different brands have their little write up saying pick me i'm the best because this mag says so. Well here's
|
| transfer case lube | 23 Mar 2007 00:15 GMT | 2 |
What to use in a 95 yj? it has a red fluid in it now, ATF? thanks
|
| Question about Wrangler Manual Transmission | 22 Mar 2007 23:30 GMT | 3 |
Fifth gear went out on my 94, four-cyl. wrangler (I think it's an AX-5 transmission). I took the tranny down and removed the rear half of the housing, and sure enough the fifth gear and the fifth counter- gear and the counter-gear needle bearing were all chewed up. So, I
|
| Towing a Jayco 1406 Camper with a YJ 4.0L | 22 Mar 2007 22:51 GMT | 10 |
It's that time of the year when we pull out our campers and get them ready for some spring camping. I've been pulling my camper with a Ford F-250 and have had no problems. I have recently sold the Ford and plan to use my Jeep Wrangler as the tow vehicle. For those who are not
|
| jeep pcm unit | 22 Mar 2007 20:23 GMT | 1 |
i have a grand cherokee laredo 2004 model and i am searching for a PCM to buy. can anyone out there help me? afia
|
| Rear Bumper Design Feedback | 22 Mar 2007 15:24 GMT | 8 |
First off, I want to thank Roy and Jeff for sending me some pics of Air tank bumpers about a month ago. Now, I've finally started designing a set for my CJ7. I'm looking for people to give me feedback on it. Here is a general description. It
|