| Thread | Last Post | Replies |
|
| Weird noise when turning right - 90 XJ Cherokee | 20 Mar 2007 02:58 GMT | 7 |
I just put the pro comp 3" lift on last night and i noticed little noises all over, But the one that really caught my eye was when i turned right going semi fast it would make a really loud grinding noise i could feel it in the steering kinda and on the floorboard?
|
| 2000 burnt orange wrangler | 20 Mar 2007 01:19 GMT | 7 |
i called a guy about a burnt orange (thats the color he said it was) 2000 wrangler. cant seem to find a picture of one. how bad looking in general are they. thanks john jr
|
| Shoe Polish on Soft Windows | 19 Mar 2007 23:00 GMT | 3 |
I just bought a 2002 Wrangler. One of the zip-out soft windows has pink shoe polish on it, that is obviously intended for glass windows. Any suggestions on what product to use to remove the polish?? Thanks.
|
| 94 Grand Cherokee 5.2L V8. ..If Cold, Tranny wont go into drive | 19 Mar 2007 16:11 GMT | 4 |
Was just given a 1994 Grand Cherokee. V8 5.2 engine. I live in the northeast so the outside temp dips down to zero overnight. I went to use it the other AM after a zero degree night. It fired
|
| 94 Grand Cherokee 5.2L V8... Speaks Spanish | 19 Mar 2007 12:23 GMT | 2 |
94 Grand Cherokee 5.2L V8. ..The LED readout on the dash is in spanish language mode.. Anyone know how to get it back to english, or where I can hire an interpreter willing to live in the back of a jeep?
|
| Inappropriate use of Jeep name? | 19 Mar 2007 01:47 GMT | 25 |
http://www.amphijeep.biz/
|
| Wrangler Rack | 19 Mar 2007 01:06 GMT | 3 |
I'm looking for suggestions / comments on racks for my '04 Wrangler. I'd use it mainly for hauling my whitewater kayaks. I like the looks of the Smittybilt Rock Crawler rack (there appears to be a Rugged Ridge rack that is identical) and the Bestop rack.
|
| "Jeep stretches Wrangler and adds two doors" | 18 Mar 2007 20:54 GMT | 4 |
I'm not spammer and I have a 2000 Jeep Sport Cherokee Mike http://www.washtimes.com/autoweekend/20070315-125706-4631r.htm Jeep stretches Wrangler and adds two doors
|
| 4 low not engaging | 18 Mar 2007 17:43 GMT | 7 |
I had a 4" lift put on my '97 wrangler about a year ago. The guy that put it on was a friend of a friend and lives really far out of town. His dad actually runs a mud-sling competition and he works on all kinds of jacked up mud mobiles and he did a good job with the install.
|
| 33x10.5 or 32.11.5? | 18 Mar 2007 09:24 GMT | 3 |
I'm looking at the RE6111 4.5" super flex kit for my XJ. I know the RE6111 is an AAL kit, but I all have a brand new set of 3.5" RE springs lined up for cheap, so I'm going to buy the AAL kit and sell the AAL. Anyhow, do you guys think I'd be better off running 32.11.5's or 33. 10 ...
|
| all the gauges on 98 jeep wrangler went dead ! | 18 Mar 2007 00:12 GMT | 2 |
Just bought a 98 jeep wrangler, and in an attempt to replace the factory-issued tape player by a CD stereo, all the the gauges on the dash board aren't working anymore. Is it a problem with the fuses or the wires/ ( by the way,
|
| JeepLiberty | 17 Mar 2007 22:12 GMT | 2 |
planning for a birding trip next month to Arizona and its Mexican mountains, I consider hire a Jeep Liberty instead of a conventional car as the roads probably might be rough at times. We do not have this jeep in Sweden but we have Cherokee. What's the
|
| NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150 | 17 Mar 2007 19:42 GMT | 2 |
The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150 four-banger engine is Jeep Part #52000070. Inside the cylinder ther are only two parts, a metal pison and a rubber seal that follows the piston in and out. I want just the rubber seal that goes on the piston but ...
|
| Different Type Of Flasher Problem | 17 Mar 2007 18:26 GMT | 8 |
I checked through all old topics here on this subject and read them before posting this. I have a 99 TJ Sport. For a long time, when I hit the brakes the left turn signal light would come on steady with the brake light. This stopped out of the blue. NOW, the flashers do
|
| rear main seal (replacement with one piece seal) | 17 Mar 2007 17:32 GMT | 2 |
I have an 85 CJ7 amc 150 i4 and currently doing a clutch job-flywheel is pulled off. The rear main seal is leaking, and I'm not sure if I actually have to pull the oil pan to put a new one piece seal in. If I don't have to pull the oil pan etc, do I have to drain the oil or
|