Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Jeep / March 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
1995 jeep wrangler will not start?10 Mar 2007 14:21 GMT6
I have a 1995 jeep wrangler 4 cylinder 5 speed. It ran fine until I went to
start it. vehicle turns over with starter ok.
Can hear fuel pump in tank going on when I turn key on. sprayed starter
fluid in air cleaner and it did not respond. (looked to be other problem
Chrysler may be sold10 Mar 2007 14:13 GMT22
The word now is that DCX may split Chrysler (and certainly Jeep will
go with it) off from its corporate structure.
DCX has been a failure not because of Chrysler, but because of German
management who refuse to make good on the idea under which the merger
97 TJ 2.5L performance parts10 Mar 2007 03:35 GMT46
hey all,
Last week purchased a 1997 Wrangler SE (2.5L), automatic
transmission.  It has large 32" tires and lift kit.
Nice looking but performance is poor.  If I could eek-out another
cj5 tire clearances10 Mar 2007 01:07 GMT2
i need some help
i have a 1963 cj5 with stock springs running 31/10.5/r15 with the 1"
wheel spacers
I have about 1" clearance between tire and front springs when wheels
318 VS 4.0 springs10 Mar 2007 01:07 GMT2
does anyone know if there is a diffrence between the front coil
springs used with the 318 and 4.0 engines?  i have a 94' ZJ, and i am
fabricating a stinger style front bumper.  im not sure, but i think
that it will weigh in the neighborhood of 100-150 lbs.  i have the
93 Cherokee09 Mar 2007 20:24 GMT2
Anyone know were the horn is on this truck? I have looked everywere under
the hood and cannot find it.
93 cherokee09 Mar 2007 16:10 GMT8
Anyone know were the horn is on this truck? I have looked everywere under
the hood and cannot find it.
Posting the RAMJ+W (This) Newsgroup's CHARTER!09 Mar 2007 00:35 GMT1
This group's Charter needs to be posted regularly to keep it valid and
it has been a while as I was reminded by a Spam mer so I am just putting
it up for all to see.
Some 'Stammers' will actually honor it to avoid bad press and a big
Rear axle noise '02 GC08 Mar 2007 20:14 GMT7
I have an '02 Jeep Grand Cherokee. It is the "Overland" edition with
the High Output 4.7 V-8 and Quadra Drive 4WD system.
I had the 60,000 mile service performed by my local jeep dealer just
600 miles back and in the last few days I've noticed a combination
Repair Manual08 Mar 2007 16:07 GMT1
Where can i get a good repair manual for my 1999 jeep cherokee sport,
especially all sensors on this vehicle. thank-you.
Interior Door Handles: '93 Cherokee XJ08 Mar 2007 15:14 GMT13
The driver's side interior door handle on my '93 XJ is somewhat
suspect.  Although it still does the job opening the door, it just
kind of hangs there... i.e. it doesn't "spring" back into place after
I pull on it to open the door.  Now, the other night, as my wife is
Snap-on tools cheap on the bay.08 Mar 2007 14:49 GMT15
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMESE%3AIT
&viewitem=&item=170084136314&rd=1&rd=1

see my other auctions. Thanks
tires.... kinda OT08 Mar 2007 02:38 GMT9
well i got me a new used vehicle... and 1 tire has a slit in the
sidewall. it doesnt go through it... it holds air but you can see its
a small slit.
any way to repair this?
Rear tail light bolts07 Mar 2007 18:06 GMT5
I have a 2000 Jeep Cherokee and I was going to replace the passenger
side rear tial light but when I went to do so the socket set that I
have which has standard and metric sizes did not fit the bolt.  Does
anyone know what size socket will work on the bolt?
'97 Jeep Grand Cherokee Laredo 4.0L stall problem07 Mar 2007 16:39 GMT5
I've been having a strange problem with my Jeep.  Occasionally, it
will stall out shortly after starting.  It keeps running if you just
let it sit there idling, but the stall seems to happen shortly after
it's put in drive.  Often, it seems to happen only after repeated
Pages: 1 2 3 4 5 6 7 8 9 10 11 February, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.