| Thread | Last Post | Replies |
|
| TJ LIFT KIT -- HELP PLEASE | 31 Jul 2007 19:57 GMT | 17 |
Hello all. I know you've probably heard this question a million times, but here goes. I have a 2006 Wrangler X with the 6 speed manual tranny and A/C. I want to lift my jeep, but I don't want to spend a lot of money on replacing the CV driveshaft and SYE kit. My
|
| death wobble with a 99 tj sport | 31 Jul 2007 18:13 GMT | 46 |
I have a 99 tj sport with a 5 speed stick shift with a 2.5 spacer lift and keep getting the death wobble almost every day for about 2 weeks now and it is getting old the death wobble comes at about 45 to 50 mph after I go over a bump and it comes some times when on the highway
|
| engine surge when stopping | 31 Jul 2007 17:36 GMT | 1 |
2005 Wrangler - when I am coming to a complete stop, I get a surge of power (that is, the RPM goes from about 800 to 1100 for a quick second. Any ideas of the cause?
|
| Building a 'new' CJ7 | 31 Jul 2007 05:08 GMT | 16 |
I saw on the Discovery Channel a company out of California building 'new' 1969 Camaros (Unique Performance). They're getting $125,000 for them. They start with a junk from a boneyard, presumably using the VIN and shell. I was thinking (probably a mistake - but...) one could pretty ...
|
| '88 Grand Wagoneer Tranny (727) Purge? How to? | 31 Jul 2007 03:13 GMT | 1 |
My Dad has an 88 grand wagoneer with an auto 727 tranny. He just discovered the previous owner put in ATF4 in the darn thing instead of the Dexron. How does one purge the fluid out (easily)? He can of course drop the pan, but that will probably only exchange 1/4 of the
|
| 1986 Jeep Grand Wagoneer | 30 Jul 2007 16:53 GMT | 1 |
I wrote in a few weeks back about my Wagoneer backfiring and the dying on the way back from NH. Thankfully your advice was right. I rebuilt the carb, replaced the disributer and plugs and got it going. I had some one else set the timing and replace the muffler (previous owner
|
| TJ LIFT KIT -- HELP PLEASE | 30 Jul 2007 16:39 GMT | 1 |
Hello all. I know you've probably heard this question a million times, but here goes. I have a 2006 Wrangler X with the 6 speed manual tranny and A/C. I want to lift my jeep, but I don't want to spend a lot of money on replacing the CV driveshaft and SYE kit. My
|
| TJ Hardtop Roof Racks? | 30 Jul 2007 04:35 GMT | 5 |
Hey everyone, I'm thinking of getting a TJ with a hardtop, but have a bit of a problem. I need to be able to carry two Ocean Kayaks on top - with the top on. Does anybody make a roof rack for the TJ's hardtop and how much
|
| Grand Cherokee Tires | 30 Jul 2007 01:57 GMT | 3 |
I have a 2004 Grand Cherokee Laredo (Freedom Edition) with the original tires: Goodyear Wrangler SR-A P235/65 R17 about 56K miles. I want to stick with original size tires but I am looking for suggestions for alternative brands/models. I would prefer to have tires
|
| Popping noise when turning | 29 Jul 2007 01:01 GMT | 17 |
I replaced my right front hub assembly yesterday, and everything was ok right after, but now I am noticing a popping noise (multiple times, like pop pop pop pop) when turning or swerving at low speeds. Could this be a bad U-Joint? I also have another problem where the steering
|
| CJ3s | 29 Jul 2007 00:13 GMT | 3 |
Did Mitsubishi make CJ3s ? For how long ? I saw a (presumably) modified CJ3 with very wide axles and wheelarches with a Mitsubishi stamp on the grille, on Koh Tao ( an island 70 km off the east coast of Thailand). Don't know what engine it had in it, but it sounded
|
| Anyone here know Kenny Kizzar (Kizzar Automotive) ofChattanooga TN? | 28 Jul 2007 19:39 GMT | 3 |
He just offered me a power seat track for a Cherokee, $100, paid-in-advance by cash, cashier's check or money order. Shipping would be by UPS to be paid on delivery. Could it be someone's trying to swindle my yankee a$$? There was a Kenny Kizzar out near there who used to be a ...
|
| Jeep Code Question | 28 Jul 2007 18:14 GMT | 7 |
I have a 1998 Grand Cherokee, 6 cylinder and on Saturday it seeme like it was idling a bit rough. Well on the way home from an errand the check engine light came on so I pulled out our code reader and i gives me a P0121 - something about accelerator sensor/A circui
|
| Junk Yards in MD | 28 Jul 2007 17:52 GMT | 6 |
I remember a salvage/junk yard in MD where you pull your own part, pay a dollar to get in, flat rate for all parts. I can't remember the name? Anyone have a better memory then me?
|
| J.C. Whitney fiberglass body tubs - any opinions? | 28 Jul 2007 00:02 GMT | 5 |
Does anyone have any experience with the J.C. Whitney fiberglass body tubs (see link below). The description sounds good and the price is several hundred dollars less than other sources. They are also offering free shipping for limited time.
|