Hello Jeepers,
I'd like to correct the pinon angle on the Dana 30 in front of my '93
YJ.  It has a 4" SUA lift and has some vibration while in 4 wheel
drive.  I don't want to use any degree shims and mess up the stering

Just bought a used popup camper.  The tow vehicle is a '93 XJ with
4.0L and automatic transmission.
Should I be towing  in "D" or in "1-3"?
Thanks,

89 Cherokee rattles at startup, ceases noise when warm but oil
pressure drops to 20. Oil and filter has been changed and lucas
additve put in. Any suggestions besides a bad bearing.

I have a 97 TJ and 95% of the time it idles perfectly. However, about
5% of the time, usually when the vehicle has been run for more than 20
minutes or so, the idle in neutral or park will shoot up to between
1200 and 1500 RPM. The only way to get it to stop is to put the

I think the clutches in my 96 XJ w/ Track Lok Dana 35 are going bad.
160,000 miles. (clunking/knocking and growning noises)
I have someone willing to sell me a Chrysler 8.25 from a 96 XJ w<65k
miles for $130

Once again my 1993 Jeep Grand Cherokee Limited failed it's annual
emission test (in spite of me staying up all night studying!)
As usual, The HC reading was low, the CO reading was low, the Catalytic
passed, the PCV system passed so what failed?  

Apparently you condone the actions of your resident Goggleologist
with his rants, raves, lies, crossposting, derogatory remarks toward
the people in the group, and other Idiosyncratic behavior he performs
daily to elevate his preposterous and absurd ego.

I have a 2003 Jeep Grand Cherokee Laredo 4X4 and it's in need of new
brake pads.  I used to do all my own work on my vehicles up until you
needed a bazillion specialy tools and a $10K computer to replace
something.  My Jeep needs brakes and I was wondering if anyone knew if

I'm looking to get 4 foglights for my lightbar. However, I live in Canada
right in the saltbelt and need something that won't rust all to hell in a
few years. What are my best options that aren't too expensive?
What materials should I get and what should I avoid? Chrome, steel, ...

very informative step by step guide...
http://cometo.know.googlepages.com/how_to_obtain_car_insurance

is that right?

Test - pls. disregard

I have a 1999 4.0 TJ i just bought it a month ago and i was wondering
at what rpm should i be shifting at during normal driving? i dont have
the owners manual so anything you can clue me in on that i might need
to know would help alot

From the latest trip, in case you are interested.
http://jbjeep.terahex.com/Naches2007/album/index.html
As always, it is slow to load and has limited bandwidth.  Please be patient and keep
trying.

Does anyone know where the vacuum hose from the power valve should be
hooked up to.  I ahd someone do some work on it and now it goes to
nowhere.