| Thread | Last Post | Replies |
|
| Since you know who Bill Hughes is, now Know "Cujo DeSockpuppet"!! | 11 Jan 2008 15:04 GMT | 2 |
Since you know who Bill Hughes is, now know "Cujo DeSockpuppet"!!! "Cujo DeSockpuppet" may not like it, but it is only fair. http://joejared.cc/cujoJoe.htm That will answer all questions about "Cujo DeSockpuppet" . "Cujo DeSockpuppet" is a stalking harassing insane
|
| Check me and my real name, Joe Jared out | 11 Jan 2008 04:51 GMT | 1 |
http://joejared.cc/cujoJoe.htm
|
| Joe Jared ("Cujo") you sack of sh.t; you are not fooling anyone! | 11 Jan 2008 04:50 GMT | 2 |
Joe Jared ("Cujo") you sack of sh.t; you are not fooling anyone!!
|
| You know who Bill Hughes is, now Know "Cujo DeSockpuppet"! | 11 Jan 2008 04:40 GMT | 1 |
You know who Bill Hughes is, now know "Cujo DeSockpuppet"!! "Cujo DeSockpuppet" may not like it, but it is only fair. http://joejared.cc/cujoJoe.htm That will answer all questions about "Cujo DeSockpuppet" . "Cujo DeSockpuppet" is a stalking harassing insane
|
| 4.0 reliability? | 11 Jan 2008 03:57 GMT | 15 |
I don't have any experience with Jeep products but after much research I've decided that a late 90's/early 00's Jeep Cherokee or Grand Cherokee is the next vehicle for me. I'm thinking I'll probably get one with the 4.0 inline 6. What should I worry about with this engine if it ...
|
| 97 TJ/rear lights on always | 11 Jan 2008 01:50 GMT | 3 |
Shut the Jeep off and back lights are on as if the headlights are on! In the past, I could mess with the flashers, blinkers and it would go out. Not this time. HELP! Any links to diagrams would be helpful as we're going to look at brake switch and connectors this weekend.
|
| Something to look at... | 10 Jan 2008 20:24 GMT | 3 |
http://fishki.net/comment.php?id=29928
|
| 1999 Jeep Grand Cherokee | 10 Jan 2008 16:31 GMT | 1 |
Okay...my transmission, the faster I go, the louder it sounds. Is this normal? I know it's terrible, but when I purchased it, I always played my music so loud that I never noticed!!! My jeep only has 90,000 miles on it and has always had routine maintainence done...(well before I ...
|
| 1982 CJ8 6cyl Oil Pan gasket/kit? Oil pump? | 10 Jan 2008 16:02 GMT | 24 |
A friend was trying to help me siphon some oil from my Scrambler to get an oil analysis done. (Analysis came back fine.) However, he used some plastic tubing to get the sample through the dipstick tube, got it caught somehow when pulling it out, and broke
|
| error code on 98TJ 4liter | 10 Jan 2008 00:42 GMT | 3 |
I am getting a check engine light and the code reader indicates: P0 107. Which is Manifold Absolute Pressure/Barametric Pressure Circuit low input. Have no idea what or how serious this is. Any help out there?
|
| Turn signal problems 2001 TJ-resolution | 09 Jan 2008 15:40 GMT | 1 |
Posted back in November and December about my turn signal issues; inoperative initially on startup, except the brake light would cancel on the side the signal stalk was moved. After the dealer had the Jeep in the shop a number of times the issue was finally found. The fuse panel ...
|
| valve cover gasket replacement 94 cherokee | 09 Jan 2008 03:46 GMT | 14 |
Picked up a cork gasket for this before looking at the service manual. Per the manual: The original grey gasket material should NOT be removed. If sections of the gasket material are missing
|
| 96 JEEP Cherokee Country wont start | 07 Jan 2008 16:37 GMT | 1 |
I have a 96 jeep cherokee country that wont start. I can put gas int the throtle body and it will run till it runs out of gas. I checke the fuel pressure and there is none. it appears the fuel pump is no working. I have not removed the fuel pump yet. With the ignition o
|
| Question about the 4.0 | 07 Jan 2008 15:17 GMT | 4 |
My daughter has a two wheel drive Cherokee It has a 4.0 high output. 222xxx miles on it. Runs like a champ. No noises from it. No smoke. Perfect. I'm not sure whether it is even the original engine, but whos to say. Anyway, when she gets another car, is this engine worth
|
| Input anyone....Auburn Gear | 07 Jan 2008 02:38 GMT | 3 |
Hi all. I would like to know if anyone here has had any dealings with Auburn Gear. Particularly with the Ected locker. I have an Ected in front and rear ( d30& d35), they have been in now for three months. The first time I used the front locker I had a hard time unlocking it, after ...
|