Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Jeep / January 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
I can't take it anymore07 Jan 2008 00:44 GMT33
Today, 01/03/08, I opened the newsgroup to 211 new messages. There were two
or three replies to the clutch issue where the OP says he installed a box
full of parts on a 4-banger CJ clutch, and the pedal does not work; a
spammer post from the GPS salesman; another spammer passing ...
Front shocks06 Jan 2008 23:18 GMT1
Just checking... on a 96 Cherokee the front shocks have a nut AND bolt
holding them on the bottom not a nut welded to the body, etc like the rear
ones.
I'm ready to change them.  I ended up having the rear ones done by a
Fog Lamp Problems06 Jan 2008 03:36 GMT5
Ok have a problem that I hope someone can fix 98 Jeep Cherokee
Smelt some smoke (than saw some) behind dash it looked like the
factory fog lamp shorted so I fixed all the wires and i am about to
install a new factory switch. 4 wires
Mounting 2 Meter ham antenna on Jeep CJ5 Softtop ?05 Jan 2008 19:22 GMT9
I plan to install a 2 meter radio in my 1980 CJ5 Jeep  (softtop).    My plan
is to construct a mount that will attach to my rear tire mount.  Because
this will be a custom mount, I can have the base of the antenna even with
the top of the spare tire, or I can elevate it some for ...
265 x 75 x 16 Tires on '06 TJ05 Jan 2008 01:46 GMT1
I have a 2006 Rubicon with 245 x 75 x 16 Goodyear MTR tires - totally
stock.
Will 265 x 75 x 16 tires fit without rubbing (I know about adjusting
the steering stops?)
Clutch problem, please help!04 Jan 2008 16:34 GMT6
I've got my brothers 85 cj7 with the 150" 4cyl, T4, dana300, with the
hydraulic clutch. He brought it to me with no clutch action
whatsoever. I've worked on pretty much nothing but jeeps for about 15
years, but this is my first four banger/hydraulic clutch. When I took
Liberty 2007, how to replace radio c/d  ?04 Jan 2008 14:27 GMT2
I want to remove the stock radio c/d in my Liberty, and replace it w/
a radio cassette player.
Does anybody know how to do this without ruining dashboard molding
etc?
89 Pioneer won't turn over/fire04 Jan 2008 03:39 GMT1
    My 89 Jeep won't fire I guess is the term, tries to start hear the
engine trying, but nothing, prior to this it was taking a try or two to start
like 5-6secs a try usually on the second it would...I'd love any suggestions
or area's to look into, thanks.
Get $5US anytime03 Jan 2008 08:58 GMT1
Get $5us if you register on housinghouse.com that is professional in
auto area, like HID.
2000 Cherokee, coupla questions03 Jan 2008 00:37 GMT1
1/ Wipers don't park, they stop wherever you turn the switch off. Also
"intermittent" position acts same as "low" position. I've seen conflicting
posts regarding a "pulse module" that looks like it may be on
earlier-than-2000 models. Also seen comments that it's the Body Control
Restored 1920 Dorris K-402 Jan 2008 14:47 GMT7
Restored 1920 Dorris K-4
My Husband found it in a barn in Montana. After 4 years and
lots of work, his labor of love is 100% restored! The RV of my
Husbands dreams reaches a top speed of 15 miles per hour,
35 X 12.50 X 1702 Jan 2008 14:47 GMT5
I am looking for a 35X12.50X17 used tire and a 17 in 4x5 rim for a spare for
my YJ. Anybody kow where I can get one reasonable I live in Michigan, and if
it's close I will pickup.
The Tears Of Finding The Truth02 Jan 2008 04:34 GMT2
Through The Internet
INTRODUCTION
                       The following story occurred on the Internet
through one of the chat programs (Freetel) in January 1999. It is a
Tilt Steering Column Disassembly?01 Jan 2008 06:35 GMT9
Does anyone have a link to a good site covering tilt steering column
disassembly ?  The column is out of about an 84 CJ.
Thanks,
Charles
Why can't Goatfucker Bill post to AUK?01 Jan 2008 05:39 GMT51
It's because BilliBoi is a f.cking coward.
*BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!*
*BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!*
*BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!* *BAWK!*
Pages: 1 2 3 4 5 6 7 December, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.