My '95 YJ with 2.5 engine and AX5 tranny recently got a 4.5 inch lift
and it has a dana 44 rear axle with 4.56 gears.  Based on looking at
previous posts it seems 33 inch tires should fit with no problems and
the rear axle is strong enough.  Would anyone here advise me to stay

Hi my name is Luis i am Portuguese, i want to support my cause to
bring the classic Jeep Mahindra mm540 dp new model thar to Portugal
please contact Sino Motors on Portugal and leave a note saying that
you want to have a Mahindra thar cj7 clone

We are selling HID CONVERSION KIT , Ballast and the related product,
please come to our website and check it out!!! Our business is your
business!!
WWW.BVSTATION.COM

I just finished the '87 Wrangler project.
I posted pics over at:
alt.binaries.pictures.autos.4x4
Let me know what ya'll think.

[short version for those who don't want to read all the junk below: I
need help getting my radio working again, the circuit blew]
Recently something let loose in my Jeep and these 3 items don't work:
- radio

i may have found an '06 rubicon that i like.  it has a hard top and im
looking at bestop sailcloth replacements that use factory hardware (which
this jeep doesnt have).  where would be the best source for the necessary
hardware?

Anyone have an opinion-I think it's crap. Mine was pre-installed with
one free year. They seem to just play "B" sides.
Skyslider
2008 Liberty Ltd.

Testing a back-door through an unsecured server.  If this makes it to the
outside world, someone let me know, please.

Just bought a new O2 sensor for my jeep. It is a 4.0L 1990.
It uses a 3-wire type sensor. 1 for signal and 2 for the heater.
Now, the sensor I got had the wrong plug. Excactly oposite of what i should
bee. So in fact I could plug the new sensor into the old sensor :-)

What type of tool do you use to remove this wheel?  The conventional
steering wheel puller will not work.   There is nothing flat to grab

Hi gang,
On the way out to Bickel Camp this AM the transfer case in my '93
Cherokee started making noise - clicking with every rotation. A big
sound happened, I looked and can see a hole on top of the case. The

News article about the writer's WGA strike, but the lead photo is from a
CBS reality show.  Notice the stamped logo about the radiator grill.
http://www.nytimes.com/2008/02/12/arts/television/12strike.html?ref=arts

Any idea what it should cost to have new sway bar links installed at a
shop? I am getting a "popping" sound when turning left into an bump
when the jeep rocks. How hard is it to do by yourself? Thanks
Bryan

I have a 2001 Jeep Wrangler with the 4.0 engine.
I need to remove the intake and exhaust manifolds. After evaluating the
situation it looks like some of the  mounting bolts are almost impossible to
get to with out pulling the engine. It looks like after removing the power

see http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1506 for pics and
specifics.