| Thread | Last Post | Replies |
|
| buying a used 2000 Wrangler with 108K miles on it | 18 Mar 2008 21:45 GMT | 4 |
What should I watch out for if I were to go crazy and buy a 2000 Wrangler Sport with 108K miles on it ? http://www.autotrader.com/fyc/vdp.jsp?car_id=229916580&dealer_id=294883&reset_cr umbs=y It has a new top and new tires.
|
| diesel wrangler | 18 Mar 2008 21:44 GMT | 31 |
Is there any news on the diesel wrangler yet ? I would buy one and pay MSRP today ! The 3.8L gas motor is very marginal for this vehicle. The 3.0L diesel in the grand cherokee would be awesome in the wrangler.
|
| Help Installing a Radio in a Cherokee | 18 Mar 2008 14:36 GMT | 4 |
I just got a 1990 Cherokee and the previous owner decided to take out all four speakers and cut the wiring harness. I can currently find 13 wires and the antenna plug. I only intend on installing two speakers because I'll never be in the back and I don't have that much money.
|
| Answering my own question - XJ Rear Discs | 17 Mar 2008 15:26 GMT | 10 |
A month or two ago, I asked whether stock XJ wheels would still fit if Liberty Rear Discs were mounted onto my '98 XJ. On Saturday AM, I pulled the rear brake parts from a crashed '07 Liberty. They essentially were a direct bolt-on, and the stock wheels
|
| XJ hood release cable | 16 Mar 2008 21:00 GMT | 1 |
OK so it was above freezing to day and the sun was shining, great time to change the oil on my YJ and the wife's XJ..... Well the XJ's hood release cable came off in my hand --- looked like maybe two strands were just holding on and decided to let go today. Luckily the
|
| catalytic converter and exhaust upgrade? | 16 Mar 2008 20:48 GMT | 4 |
93 YJ - When I first start up in the morning the catalytic converter rattles like the dickens until it warms up (about a minute). The muffler has peeled a layer of rust.
|
| BG fuel/air induction service? | 16 Mar 2008 15:26 GMT | 2 |
Have any of you guys ever used this service or done it to your Jeeps ? Thanks. James
|
| 2m/440 antenna recommendations for 08 KJ | 16 Mar 2008 05:48 GMT | 11 |
Been out of touch with the latest and greatest in amateur radio gear. So, looking for any first hand recommendations on antenna/mount combo's for a KJ that I'm picking up this week. If I remember rite, best spot to mount is above the tire carrier.
|
| yellow jeep pics | 15 Mar 2008 22:17 GMT | 10 |
now that my jeep has a proper soft top and soft doors, here are my proud owner pics: http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1544 ....feels great to be back.
|
| Help, Hella 500 Driving Lights | 15 Mar 2008 15:54 GMT | 1 |
Hello everyone, I need a little help. Never tried to hook up lights before and I am having a little trouble with the installation of the Hella 500 driving lights on my 2006 Wrangler X. I figured out most of the wiring but there is the green wire I think is
|
| need engienm 4.0 1992 to 1995 auto | 15 Mar 2008 08:07 GMT | 1 |
i bought a cherokee and it needs a engine anyone in michigan got one?????
|
| 2008 Acura TSX:Sporty and economic, with room for baby. | 15 Mar 2008 07:29 GMT | 3 |
2008 Acura TSX:Sporty and economic, with room for baby. This car has been a joy to drive in the few short days that I've driven it. It handles well, has excellent fuel economy and is roomy without losing the sporty feel. At 28k, it's probably the most
|
| Help 89 Cherokee Ball Joints | 15 Mar 2008 00:47 GMT | 7 |
I'm looking at replacing some bits on my front end and since I'll be working in the area, I'm thinking about replacing the ball joints (are they ball joints or really king pins?). In any case, I don't want to go to the effort if there is nothing wrong with the existing ball ...
|
| Recommendation on Shocks for 89 Cherokee | 15 Mar 2008 00:36 GMT | 1 |
I'm looking for advice for shocks for my 89 Cherokee. I don't do a lot of four wheeling but do a little snow driving on the way up to the ski hill. Here are some other details: Stock setup - I'm not planning on a lift - however I might consider a 1
|
| Help: CHerokee Hub Removal | 14 Mar 2008 18:51 GMT | 9 |
In the online directions on replacing ujoints (http://www.myjeepxj.com/index.php?page=u-joint-replacement), threes a mention of removing the three bolts with 16 point heads that hold the hub assembly. What kind of socket or special tool do I use to unscrew a bolt
|