Car Forum - Jeep

Thread preview

Thread	Last Post	Replies

Clutch adjustment?	23 May 2008 20:54 GMT	2
Mates, Is it possible to adjust the clutch on a '94 YJ? It has 80,000 miles on it and the clutch just is not as crisp as it once was and sometimes it is difficult to shift from first to second and second into first. I've had
Websites for preview of 2009 Wrangler?	22 May 2008 06:52 GMT	54
We are thinking about buying another Wrangler (Unlimited X) since the wife wants power windows and locks and has wanted them for over 20 years on her Jeep. Trying to decide if we should buy a 2008 or wait for the 2009s. I am
100-to-1 Billieboi -- and you're still 8000+ behind from 2 days ago	22 May 2008 02:04 GMT	4
Lazy fat bastard liar. Signature "You can fool some of the people all of the time, and those are the ones you want to concentrate on."
Re: INTESTINAL FORITUDE Translator, please!	22 May 2008 02:04 GMT	3
You-know-who spewed out the oft-repeated following BS: > DON'T HAVE THE INTESTINAL FORITUDE TO TALK TO ME FACE TO FACE!!!! o I have no intention of traveling all the way to your dump, not even to piss on your grave
A man among men.	22 May 2008 02:04 GMT	3
On Sat, 17 May 2008 15:32:38 -0700, L.W.(ßill)Hughes III wrote: > Hi Pat, > You're a man among men. > God Bless America, Bill O\|\|\|\|\|\|\|O
Jeep CJ7 Mopar MPFI - Failed California Smog Test	22 May 2008 02:04 GMT	45
Have had the MPFI on my CJ-7 for several years. Very satisfied. Problem is, have moved to CA from TX - in CA they test for NOX - CO and CO2 readings are excellent - failed NOX. Tester (reliable; actually a "Referee" )said the engine was running too lean, thus failed NOX. Looking ...
Scrambler Aerotank (first impression review)	20 May 2008 12:17 GMT	9
I've been having problems with my Mopar fuel injection setup, converted to a single supply line with the pressure regulator near the fuel tank. Specifically, in hot weather (West Texas hot), the engine would die after driving several hours. I'd wait for the Jeep to cool
My Newly Lifted XJ	19 May 2008 16:14 GMT	28
Finally! The lift Kit has been installed :p See pic in a.b.p.a.4x4 It's only been a day and a half, but so far, so good.
Dana 30 and 300 ?	19 May 2008 09:29 GMT	6
Anyone know the torque specs for a dana 30 or 300 pinion/yoke nut? I just swapped yokes for ubolt style, couldn't find much on net for specs, found one on D 44 at 160 pounds so I did them to that, sound about right?
Why don't you go away	17 May 2008 14:51 GMT	2
Why don't you nasty people go away and leave my brother alone?
Front Head Light Lense 2001 WJ	16 May 2008 01:38 GMT	1
lot of you asked me to post an update from 3 years ago about the front headlight lense issue....got mine polished on my 2001 Grand Cherokee from a reputable person and now it is clouding up again ... doesnt look as bad as it was back then but it is clouding up ... person sanded ...
How easy to replace rear wheel bearing on 98' Grand Cherokee ?	14 May 2008 19:15 GMT	2
I've done front drive cars and the rears are very easy. Not familiar on the Grand Chero.
giving back to group.	13 May 2008 22:34 GMT	3
This group has been awesome to me in the past so I want to give something back. I WILL NOT SHIP or POST this so the offer is only good for hand delivery in Chicago only. I have found a Jeep 1978 technical service manual ( volume 1, 2 and 3 + some
Chickenshit!	13 May 2008 03:30 GMT	2
Hehehehehehehehe! Widdle Baby Hughsie can't powst hewe in his 'own' gwoup. Poor widdle boi..... Go thuck your thumb, you'll feel a wot bedder.
Gnostalgia	12 May 2008 06:51 GMT	1
Gee gosh oh golly, Cooyon..... What happened to The Good Old Days? You know, like just a month or two ago? Are you simply getting old for your (and Jesus' as well) chosen Cursade?