I haven't made the swap yet, but I did figure out that the NV247
Quadra Trac II works a lot better...
...when there's oil in it.
Oops.

My nephew has a 1993 Jeep Grand Cherokee that pops loud when turning either
right or left.  When you are trying to park it, or turn in a driveway it
pops and jerks. The tires will squeal because it is pushing the front end
forward because it wont turn.

ONLINE RESOURCE FOR HELP DESK SOFTWARE
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
http://helpdesksoftwaremanagement.blogspot.com

Binaries posted to alt.binaries.pictures.autos.4x4.
I am installing a Bestop hinged roof rack, with universal sliding rack
mount, on my 1995 YJ.  I am primarily going to use it in the immediate
future for hauling a canoe around, so I haven't installed the sliders or

My nephew just bought a 1993 Cherokee that hit a deer last fall and has been
sitting ever since.  It had a complete tune-up just before he hit the deer.
He paid $250 for the Jeep.
The entire front end was smashed. Fenders and Hood are perfect.  I had to

On Tue, 02 Sep 2008 16:37:49 -0700, Superfuckhead Hughes FuckheadKiller of
fuckheads everywhere wrote:
Message-ID: <7MqdndzfuJXTNhLVnZ2dnUVZ_vzinZ2d@giganews.com>

What a shape, what a Figure, two more legs and he'd look like
Trigger!!
Message-ID: <hY-dnTlNRKNK25DVnZ2dnUVZ_tjinZ2d@giganews.com>
I was required to take the officer's test, while in Advanced

Did your fat a.s get all shook up today with that 5.6, to bad if you
didn't, sure would like to hear your fat a.s was out in the salt
water.
Not to worry, you do know that sh.t floats!!

Wow...been a long time since I've looked at this group, nevermind
posting....
Was just wondering if anyone was using a PC to do their OBD2 scanning/
etc..

On Tue, 02 Sep 2008 15:02:11 -0700, Superman Hughes TrollKiller of scums
24bit & squarewheel wrote.
And wrote.
And wrote again.

On Tue, 02 Sep 2008 14:59:01 -0700, Superman Hughes TrollKiller of scums
24bit & squarewheel wrote:
Message-ID:  <f6GdnStJpa16DhLVnZ2dnUVZ_hadnZ2d@giganews.com>

On Mon, 01 Sep 2008 19:41:33 -0700, Superman Hughes TrollKiller of scums
24bit & squarewheel wrote:
Message-ID: <3_ednWcXK6YIGRPVnZ2dnUVZ_uWdnZ2d@giganews.com>

I replaced the rear brake pads on my 1996 Zj laredo 6cyl (140k miles)
yesterday. I noticed that both rear wheels have a bit of "end shake" if
I grab the wheel (while the rear is on jackstands)and pull and push it
moves in and out a bit, somewhere between 1/16" and 1/8". There is ...

Replacing this on my Grand Wagoneer FSJ.
Does this tube need to be fuel line or can vacuum/air tubing
material be used?
Thanks,

Well, well Cooyon Hughes, did the old ED malfunctioning useless piece
of flesh finally squirt?? I mean did you get your cookies off again
with the ridiculous post at ABPA's of over 500??
Did you feel great superiority posting all that sh.t, cause I pissed