http://blogs.thecarconnection.com/marty-blog/1037914_fiat-based-jeeps-coming-in-2013
Yep the 2013 wrangler will have Fiat motor, glad I have my 04 I-6.
Hope the line stays but only time will tell.

Just checking in to see if the haterz are still hanging here.  I don't see
too many.  I put the Wrangler in the ditch last Friday, heading uphill in
four inches of wet snow.  It turns out that part time fwd isn't so good in a
skid.  We got a good foot of the stuff in Silverton ...

I read somewhere that the driveshaft on a 4WD can cause a clunk,
clunk, clunk noise if its been driven in 4WD on hard pavement . . .
and when that happens, you drive it in 4WD and Reverse to fix the
problem. Well, I didn't drive in 4WD on dry pavement, but my 96 XJ

Get step-by-step tactics for discovering whether your partner is
cheating or not, with whom, where, when, how often, for how long...
everything you need to know to end the suspicion and bring it all out
into the light of day.Simple quizzes in shopping market mags and

Anyone have a repair manual
pdf for 2002 Grand cherokee???

The Motion Sensor is a PIR and MW technology motion sensor designed to
detect human body movement in a protected area. Digital processing
ensures a high immunity to false alarms and outstanding stability. It
uses a sophisticated radio communication protocol with a high level of

Well, since the JK models came out I still am not use to or like the
tupperware body parts especially the bumper system.  A friend liked my
new bumpers I frabricated for my TJ and wanted something simular on
his 2009 JK Rubicon.  Man what a PITA to design something for the JK

Thank you Veterans
http://www.BillHughes.com/Veterans.htm

I have a 2000 Jeep Grand Cherokee, 4.7 liter engine.   198,000 miles.
Engine has been literally perfect to now.
In the last week, engine has stalled three times, at very slow idle, or very
low speed.    I have then noticed that all of a sudden, it is sluggish to

http://www.mopacer.com/
Ok.. it's not a jeep although it is an AMC and has a Jeep
inline 6.  Stroked to 4.7.
As light weight as a pacer is and with a 4.7, that thing

My 1987 Grand Wagoneer (AMC 360) temperature gauge is not working.  I
have replaced the sending unit AND the gauge, and still not working.
What's next to try?
Thanks to all.

Jeep 2000 Grand Cherokee.   Bought Michelin Cross Terrain tires  (245/70/16)
three years ago, and put  74,000 miles on them.   Now, I can't find these
same tires anywhere.   Not at Sears/ Walmart/ Sam's Club/ Sun Tire/ etc, and
many online outlets.

How do you tell if a Grand Wagoneer (AMC 360) has an 85 Amp Alternator
or not?  I can find no data plate on the alternator, but this is how
the parts store determines which belts are correct.

Ok,
so I over torqued a clutch pressure plate bolt and I think I stripped it in
the flywheel.  The bolt isn't coming out and I cant turn the bolt by hand.
The other four bolts are seated very nice.  So...can I leave it alone?

I am trying to replace the turn signal flasher, which is located in
the fuse panel under the left side dash. I cannot reach the flasher,
although I can see it. I'm trying to remove the fuse panel so I can
get my hands on it. No luck so far. Any ideas? Thanks!