Anyone whos been there and done it ... does the repair pannel come with the
the box section along the top edge.. or do I need to get this seperately. I
can't see it listed and on Paddocks picture it's cunningly hidden from view.
Also does it come with the bracket to bolt to the body ...

OK, for holiday with Landrover and mrs next year we are going to South
of France / Italy.  I was planning to take a cheapo coolbox with 12v
fridge cooler on the top which we bought from Woolworths (£20) and
leave it in the back of the landy connected to a seperate leisure

Ok.. Assuming I get to keep Alfie and can be motivated to do the work.
How do the plastic rivet type fixings get removed which hold the Plastic
trim rinning the length of the sills? And more importamntly incase a kiss
with the angle grinder is the order of the day. Can they be ...

Right, I now have a pair of standard springs (see earlier thread about
broken rear spring on a RRC.  Thank you very much Paddock; £50 including
next-day-panic delivery and we'll take them back if thay are wrong.
These were ordered after a chat with Mr WBH who is trying to retire. ...

...anyone want one?
http://www.ddol-las.fsnet.co.uk/temp/long_disco1.jpg
http://www.ddol-las.fsnet.co.uk/temp/long_disco2.jpg
sorry, pictures are a bit crude, but I'm an impatient so-and-so.

anyone know 'em?
specifically the 1987-vintage 3.5i and the VM 2.4.
a mate has just bought an 87 (E-plate) which was a 3.5i and is now fitted
with a 2.4 turbo, he reckons it's no use and he has to use lower gears all

My  (nearly 14 yr old) daughter loves 'Landy's (for some reason <g>)
and we've been to the Landrover Show at Peterborough for her to have a
good look around.
With her birthday coming up on the 21st I was wondering if there were

I got a leaking washer reservoir in my 98 Discovery, and I am trying to replace with a new one.  I am looking for the installation instruction in order to remove and put in the new reservoir.  Any advice would be helpful. Thanks in advance.

RR Classic, 91, 3.9 Auto
I bought this RR as a work horse to shift my music equipment around and it
does an admirable job. I bought it cheaply with a few known faults such as
blowing exhaust, failed electric windows etc......all of which have now been

Well, after a unbelievable 5 hour delay (for a 58 minute flight ffs) at CDG airport today (without even
any announcement from the f.cking French) I'm too fubar to pickup my new toy tomorrow. Not to mention the
wife & nipper! So, I'll be off round to drive the nice M25/M1/M62/M606 ...

Hi group my  Disco 2 MY2000  has not got a mechanical centre differential
lock, can one be fitted? the vehicle has electronic traction control

I have a leaky rubber fuel poipe on my 110. Runs from the RH chassis
member under the rear left wheel arch and disappears behind the fuel tank.
Can this be changed with the fuel tank in situ. Where is the connector
on the tank?

I know tyre sizes is a popular one here...
I currently have 750x16 cross plies on standard rims.
I'm looking at 235/85r16's on 6.5x16 white 8 spokes.
I recall the 8-spokes sit further out than standard rims, that's ideal

Good evening,
My friend wats to upgrade the front brakes of his Series 3 to either those
of the 109 6-cylinder or the 109 V8.
Can anyone suggest a good supplier in the UK?

Fitted the new lift pump today.
It was a simple job except the new pump did not have the brass compression
olives in the box with the pump and new gasket.
Of course by the time I discovered this the old pump was off the Disco,and