| Thread | Last Post | Replies |
|
| Eurovox radio/cassette..how to remove? Help! | 11 Sep 2004 11:01 GMT | 4 |
G'day workers.... Before I do a 'trial and error monstering' to remove the Eurovox 6315R radio/cassette from my 1997 Defender, has anyone ( who knows) got the time to outline the method of getting the unit out of the dash ?
|
| 3.5 EFi wont start. | 11 Sep 2004 09:29 GMT | 19 |
This follows on from an earlier posting i made. I have an 88 EFi with a gas conversion, the gas side of things has been sorted and it runs on gas fine, though a little underpowered. When switched to petrol though, the engine wont start, if you look at
|
| there's a bit missing here.... | 11 Sep 2004 07:32 GMT | 23 |
I was adjusting the drum brakes on my 110 today... all went well on the rear left, I took the drum off to see how the cams work, then put the drum back on and adjusted, no problem. then went to the right side and couldn't get the drum off, I tried
|
| Help ?..routing rear speaker wires in Def.110.. 'best' way ??? | 10 Sep 2004 21:12 GMT | 6 |
G'day to anyone who's put rear speakers into a Defender 110 300tdi..... ( it's a '97).. or similar. What did you find the 'best' way to route speaker cables to the rear ?? I'm going to put a bit of 'sound' into the back corners and (of course)
|
| Help help Disco stereo blocked stuck in Spain with no music | 10 Sep 2004 21:07 GMT | 4 |
Hi Folks, I hope one of you bright guys out their can help, took my disco to a Landrover main dealer for a new Diff. Ouch Ouch it did hit me very hard in the bank balance, Problem is I now have
|
| Disco rear seat project | 10 Sep 2004 19:30 GMT | 10 |
took a step forward today, seat arrived from BLRS. Not bad, I only ordered it on monday, and it's a non-standard line which they had to cover the cushions specifically for, so they weren't on the shelf. anyone with these 90/110 etc. rear benches know if there's supposed to be
|
| wiring loom.....strange request | 10 Sep 2004 19:12 GMT | 42 |
Hi all, this is a bit of a strange request...so, please bear with me.... I want to change the wiring loom on my SWB 2a. the original is tatty with a loads of extra wires for lights, etc that have been added and
|
| interior light switch | 10 Sep 2004 18:38 GMT | 2 |
I'm about to fit some flourescent lights into my 110. question is, the interior light switch on the dash, it also switches the dash panel lights on and off but only with the sidelights, does this mean that it needs the sidelights on to switch the interior
|
| Day 5 In the Insurance cover House... | 10 Sep 2004 18:35 GMT | 5 |
and still no sign of the assessor. I've now got a new benchmark for my stressometer.
:-( --
|
| 300 110 cross drill gear | 10 Sep 2004 18:33 GMT | 4 |
hi how much, were from, and how do u fit troy 110 300 S 3 88"
|
| Chequer plate again. | 10 Sep 2004 18:30 GMT | 8 |
I have found a local company who can cut and fabricate it to order. I have decided, shiny or not that I shall face the furnishings in my camper with chequerplate, not the conventional plywood, it will be interesting and more secure :)
|
| Deck for a Roof Rack | 10 Sep 2004 15:06 GMT | 20 |
Went to the Cannock Fireworks last night - good run and good show. One of my passengers, a somewhat slight young lady, spent the entire time the fireworks were going off sitting on my emergency kit on the roofrack. I'm thinking that I'd like to be able to do the same, but as the ...
|
| Disco insurance | 10 Sep 2004 10:42 GMT | 10 |
Recommendations please as to where I can get low-cost Disco insurance. Cheapest thus far is ?319. Max NCB/Protected/One driver/No claims-convictions etc Thanks
|
| Leaking lift pump 300tdi | 10 Sep 2004 08:42 GMT | 5 |
Can anyone in the group tell if the lift pump on a 300tdi engine can be serviced, or is it a throw away item? Mine appears to be leaking between the top and bottom halves just a few drips a minute whilst idling.
|
| Freelander Engine mount leak? | 10 Sep 2004 00:10 GMT | 1 |
The left-hand engine mount (the one under the air-filter box) of my Freelander seems to be oozing a dark red fluid. I can't find any othet source of a leak. Can anyone confirm that this mount contains an oil damper (i.e. that it needs replacing)?
|