On my Disco TD5 (99 V reg) I have a ABS TC HD light fault, previously when
under warranty this was cured with a new wheel sensor. So this time I worked
out which was faulty by applying the brakes on a muddy road and checked to
see which wheel locked up, also tried to spin the wheels ...

hiya,
just wondering if a series can be taken for a test without the front
bumper fitted on.
its just that ive got some alterations to make to the bumper, which

Its on again and I don't fancy Gatwick Landover fix again of a ?200 sensor
that probably dint have a fault!.
Is there any way to trouble shoot which wheel is the problem..  Last time I
went round and cleaned and reset the clearance on each sensor, have I got to

I have a couple of splits at the corners of the window rubber on the rear
door of a 97 Discovery.
I was thinking of applying some black RTV silicone type stuff to stop them
getting worse or water getting in.

Evening all
management has given me permission to change the rangie - more because I
cant make a classic look or feel anymore modern than it is! - so
I'm thinking of going Disco or 90 - however, having only just managed to get

.......But -
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=29749&item=2488294659&rd=1
Nearly died until I read the auction!!!
Nige

Is anyone out there able to look up the radio code for my 99 discovery
I?
The vin number is
SALJY124XXA560348

This %$^&$* 3.5 litre isn't having any of it. Got fuel, got good
cranking speed, got sparks, got sod all else, apart from occasional odd
popping noises.
Oddly, the plugs seem to be wired in a different sequence to my GS. I

Just swapped a 3.8ltr straight four smoker in my old  2 door RR for a
rumbling, neck snapping 3.9i V8.
Starts on the key and WHAT a difference - **** me does it go now!
Hopefully, when I try a steep hill ascent, instead of the Perkins maxing at

I have windows 2000 pro, my wife has windows xp home.
on xp she has the default windows image viewer, can I take it and
install it on 2000 pro?
I know about alternatives etc, I just want to know if I can do this

Does anybody know the answer to a seatbelt problem in
a 300tdi five door ES discovery.
the problem is the rear seatbelts are not long enough to go round rear
facing newborn child seats.

About 2 months ago there was a thread on here about this.
Lots of positive stuff about Ashcrofts ...good work and cheapest.
Looking round it seems that there are others offering cheaper deals
I'm in Yorkshire and Landy of Southport would be nearer than Luton for

My wife, all 5 foot 2 of her, want to drive my SIII but finds the clutch and brake a bit tough to handle.
Now the brake I can fit a servo to, but is it possible to do the same with the clutch?
Never heard of a clutch servo, but as it's basically the same principle can't see why it ...

hiya,
right, im putting the bodywork on my rolling chassis, using different
parts off different vehicles, ie,, the tubs of a 1966 series, the roof
and bulkhead a 1980, the doors ,bonnet and wings off a circa 1975

I've got a 98 disco series 1, and I'm unsure if the front swivel pins (I
THINK that's what theyre called?) have the 'special' landrover grease in
them.... So....
I went and paid $48 for two little plastic bags of this grease and now have