Paddocks are doing a galvanised roof-rack for Series 88" and galv
access ladder for under £150 the lot.  Has anyone had a look at these,
and how do they compare with the Brownchurch/Patriot products?
They're so cheap I am suspicious.

118,000 miles, blue with white roof, van sides.
Three seats in front and one fold down one in back.  Middle front seat has a
three point harness.
Wiring and fitting for radio (radio cassette fitted, but cassette is

In order to collect my landie, I needed to be picked up from the station to
get to the dealers which is out in the wilds.
Imagine my surprise when the scruffiest landie I have ever seen arrives to
pick me up. Then I have a double take, it's mine. The guy who had driven it

As above.  Failed it's MOT on O/S brakes conatminated.  This turns out
to be one shot swivel grease getting onto the inner surface of the
front disk.  I've googled the group for good advice about what else to
change whilst there etc.

Picked it up tonight, what a laugh! Me next door neighbour drove the Scooby & off we went to Worksop from
Bradford ( don't ask, it was supposed to be delivered to my door, but the blokes Disco popped a pot!!!!)
It was dark when we got there we illuminated it with the Scooby ...

Anybody know where I could get a control unit for the windows
of a 95 disco?
Front windows have now given up the ghost. . .
Work sometimes - when feeling up to it

I'm replacing rotors (disks) and pads on a '95 Range Rover 4.0SE.  The
bracket that holds the calipers, bolts to the axle with a fastener
that looks something like an external Torx (except more points) or a
star-allen. The rear looks to be about 13mm diameter, the front maybe

About a week ago I started getting a check engine light with codes
P0301 (misfire on Cyl. 1) and P1316 (excessive misfires). I was
getting some stumbling whilst driving, nothing too major.
I cleaned the plugs (only 3 months old, and I use the factory Champion

thinking of getting a series 3 and would like to know what age they have to
be to be exempt for  road tax?

I decided to call my new (15 year old!) RRC 'Monty' There is a blip in the power now & again & he has
told me it is a very slightly tappety. I think if its bad enough I'll stick a new camshaft in etc. Seems
an easy enough job, I'll also swap the tappets & rockers etc. All seems ...

Have you tried Victoria Bodyworks?
1-2 St. Barnabus Lane
Sheffield
S2 4TG

Ok, previous Rangie listed on ebay sold outside of auction so I missed out,
however a better one has come up...sort of. Who all of you can tell me, is
it unusual for a timing chain to jump a tooth in a 3.5 1976 model? The
fellow says that it jumped a tooth and burnt an exhaust valve ...

Looks good, just wondered if any of you chaps have used it or have anything to say?
http://www.tomtom.com/products/product.php?ID=0&Language=1
Ta
Nige

hiya,
just got a second hand external sun visor, and was wondering, before
i actualy go out in the cold.
is there a pdf doc or anything out there on the web that shows the

looking through the original manyal for my 1984 110 the dash layout
has an oil pressure guage and an oil temp guage in the centre console,
I'd like to add these to mine.
so questions are.