Anyone got a drivers door mirror for a 19/93 Range Rover going begging?
Mine got smashed off the other week and I'm having trouble getting one
(for less than new prices).
It's the memory one with two plugs on it, one white and one blue, both

It isn't hard to find copies of the Series III workshop manual on the
web.
The hosting sites seem to be in Russia.  Now, how might the Russians end
up with workshop manuals for ancient Land Rovers?

I'm not too sure what axles I have on my '71 swb. It has 11" drums on it &
looking at the haynes manual I think it's a LWB axle front & rear.
So, a question:  Why would someone put LWB axles on a SWB?  - Just to get
get 11" brakes?

I have cash burning a hole in my pocket for a late 300tdi 90 CSW or a late
TD5, must be low miles and very good condition, please if you have something
or know of a landy that would suite my requirements contact me by e-mail or
phone me on 07802 246100.

I've just remembered that I didn't change the oil in my swivels when I
did the rest of the oils (oops, I'm sure there was a good reason  at
the rime).
I probably have enough ep90 to do them but I thought about that

I'm planning to buy a RR 4.6 HSE, and I'd like to know how the services are
planned. How many miles/kilometers between each service? When are the Big
Ones ?
Just so I can figure the right mileage to buy one !

I have a 76 Rangie with a manual box and a poor body, this one is 83 and
auto
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=2489885047&ssPage
Name=STRK:MEWA:IT

I have a 1990 90TD and I am encountering the following problem.
When I drive at speeds in excess of about 45mph for  more than a few minutes
(ie speeds when the turbo should be in operation) the car loses all power
and comes to a halt with the engine giving up entirely, I solve this ...

Has anybody replaced the long rigid fuel pipes along the chassis (1988
lucas 4cu efi flapper type) if so What do you need to know, LR repair
manual has diagram of fuel lines running along top of right hand chassis
rails and sod all else, they look pretty hard to get at and no ...

The aluminium bracket (part 614870) has snapped on my 101GS, has anyone got
a spare one of these they can sell me? I would ring the owner's club but it
broke after 5pm on a Saturday so I thought I'd ask here first. Basically the
bracket has broken at the point it joins to the ...

Upon a recent clearout of my garage I can accross a couple of items stuck in
the corner that I never got round to fitting on my 1988 Rangie.
Sadly the Rangie had to go earlier this year, I needed more load space and I
couldn't get the wife insured on it (it was very modified).

I`ve seen adverts for companies selling Discoveries imported from Japan.
They seem to be of the spec. I`m looking for at a good price. What are the
pro`s & con`s of such vehicles?

you remember (some of you, don't lie) those great long bendy car radio
aerials that you had to die down somewhere on the back of the car...?
anyone know if anyone's still making 'em?
and/or some other more robust sort of aerial for a disco, which picks up a

but one i feel I have to ask!
The time has come to sell the rangie (sniff)(sob)
So thought I had better give her a proper clean up, and put the 7 seat
conversion back in (yes a proper 7 seat conversion with seat belts all

Does anyone have a spare fan drive viscous coupling for a '96 V8i
Disco?
Mine seized up on the motorway and I think me fuel consumption dropped
to about 9mpg :o))