http://news.bbc.co.uk/1/hi/entertainment/tv_and_radio/3955289.stm
Crumbs, this is a very, very sad day.

They're not in the US yet (at least not Buffalo, New York)...
I know most of the people on this newsgroup are British -- has the Discovery
been introduced there yet?  Anyone here have one?   Thoughts?

I was waiting for my new badge from the parts department & was stood close enough to a bloke on the phone
to hear everything he was saying to an (obviously) upset customer. The story went along the lines of the
LR garage had f.cked up the blokes new RR & it was undriveable. The ...

200 Tdi timing belt pulley, the one on the crankshaft.
How DO you pull it off ? I have made a pulling tool, but the necessary
force has snapped one of the three M5 studs I was pulling with. Can I
apply some heat, or will I knacker the crankshaft ?

There's an interesting description for this item on ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=29749&item=2496490709&r
d=1&ssPageName=WDVW
Whats the described problem likely to be? Do the V8's have terminal
problems, i thought they were pretty reliable?

From what I have seen this is forward facing 2 person rear seat.
How do people get into it?
Would it be posable to get one?
Any other information on this seating arangement.

Where's the ODBII connector on a 1998 Range Rover?   Do I need a special
adapter - or is the generic connector sufficient?
regards
curtis

I know this is a classic problem.....
On my 1991 RRC the drivers door has dropped slightly and while it is not
really an issue it does 'clonk' when i drive over e bump and it is an
annoyance that i need to fix, no doubt many others have had a similar

On Scrapheap tonight :)

After years of putting up with the sluggish performance of my
200TDi auto RRC, I've just had the intercooler replaced. What a
difference! Loads more power all across the rev range, on part or
full throttle. Wish I'd done it years ago. Early to tell, but so

My M-reg Disco wot I purchased not an hour ago from this 'ere
boutique...oh, wait, sorry wrong script.
I purchased my M-reg disco privately a while back and I noticed after
doing so that in the loadspace on either side there are recesses in the

I am now at the stage of having the bed base in place and the sink unit and
I have now removed the centre back seat.
The intention is to use the space for a porta potti and then remount the
seat in reverse over the top of this.

I have a Series2 fitted with a Sherpa Van Diesel. After fitting a new fuel
filter today, I was unable to bleed the air from the system. The lift pump
seemed to be useless. I eventualy took the outlet pipe off it, and it
wouldn't even suck fuel up from the tank.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=5727017971&ssPageName=
STRK:MESE:IT
FFS what is going on with eBay, I was away from the PC in the last few hours & f.ck me if a rampton
doesn't bid.
Had more than one scammer try it on too.

One of the Magazines recently did an article on the V8 its history etc and
gave recommendations on the best oils to use. Has anyone got it the wife has
thrown mine out although she denies it.
Or any recommendations. (for what is the best oil) not what to do with the