For you LPG gurus out there I've got a few more Qs!
I've now got a mixer, vaporiser and donut tank from a 1.4 Dawoo thing for my
DIY diesel project. Probably a good time to ask about regulations for LPG
systems. I'm sure I've heard they need to be checked and certificated bit

Hi Group,
Just noticed that the passenger side door mirror on my 2002 Defender 110 is
loose.
Do I really have to remove the top door hinge to get at the screws holding

Is there a need for rust free fire walls. I have a few for sale also i have
series parts 1 through 3 some 10 to 20 tons various can ship world wide.
email   jeepster81@bigpond.com

choosing tyres at the moment, I'm considering 265/75R16 on some steel
rims which I understand are offset further out than the current
standard rims.
Will these fit ok on my standard 1984 110 csw?

Anyone got a diesel disco 3 TDV6 ? what's the real day to day MPG
Company car ordering time this month, it's a toss up between the disco 3
TDV6 5 seater base model with no extras apart from metallic paint ( none of
the toys or air suspension/adaptive terrain,)

I just replaced the three core plugs under the exhaust manifold - problem is
that i can simply push the new ones into position!  - I'm going ot speak to
the guy who sold me them tomorrow but any ideas?  I expected to have to wack
them into place.

Is there a coding somewhere on the vehicle?

Has my post about the Freelander got lost or am I missing summat
Paul

Can I have some reccomendations for suppliers of a Weber 43ICH for my
SIIa, preferably online. I have just ordered one from Paddocks only to
recieve the helpfull email "We don't have any and we don't know when
we will have"

I sent a pic of my Landy into the "Reader's Landy's" section of LRO
magazine, and it's been printed!  It's the one which was "decorated" by my
so-called friends for my wedding.  There's still some pen marks off it which
won't come off!!

I've thought about modifying my current run around but considering what I'm
after, it would be much easier to start from scratch and do it properly.
But, I've got to be careful with the old points system as I don't want a Q
plate! Also I need something to... well... run around in at ...

Can anyone help with ideas... for the second time after being 'fixed'
by the garage, my disco continues to fail.... symptoms are engine
hunts between up and down to about 1500 rpm, gradually gets slower and
slower then dies. If I put it in gear, its an auto, it dies almost

I am selling a couple of genuine Land Rover jackets on e-bay on behalf
of Staffs Search and Rescue team, one Boulder (s)and one Bush Ranger
(XL). These have been donated by our local Main Dealer Evans Halshaw of
Hanley to help our fund raising efforts.

Anyone got a good, surplus, carb for a 2.25?  I have a webber but it needs
work so I'm thinking I may as well acquire a 'spare'.   For starters, the
webber needs a replacement mixture adjust screw as it has heavy grooves in
it from overtightening - so I'm looking for a good source ...

As header really, what where they (82) they seemed to be a very specific tread pattern. The ones that are
on the front of the haynes manual are the closest but I don't know what make/type that are.
If anyone knows what they are or they are still available (or even if there's a ...