Hi all: I replaced a broken cruise control switch on my steering wheel
today  (1999 Disco 2) and after putting all back together I have the
SRS light staying on in instrument panel.
I was wondering if there is a reset button or something one must do

Last time I used 'Jasmine' (just before Xmas) the windscreen wipers packed
up for no apparent reason.
Had a good look yesterday - fuse was blown. Checked for faults, couldn't
find anything wrong, replaced fuse, worked fine.

Just bought a '99 Discovery II with 74K miles - incidently paid $12,500 US.
One owner, good maintenance records. Did I get an OK deal?
Anyway, my real question is it has the Harmon Kardon radio, but no cd
player. It does have the CD button, but nothing under the seat. I heard that ...

Just had a good one. The rear of the disco was a bit bouncy on the passenger
side, came on all of a sudden. Got two new gas shocks to fit in stead of the
standard ones. Took off rear wheel to find the top of the shock had parted
company with the shaft. No wonder it was bouncy. ...

I have a 95 Disco tdi. The water pump is getting noisy. Is this an easy
repair and how much should I be looking at for a new one.
Advice appreciated
Paul

Can anyone give me intelligent information about the function of the panhard
rod on a Disco.
Fools please remain silent.
Frank

My bog standard series 3 petrol does what it says on the packet 65mph
cruising 70-75 foot down head down.Not much fun on the motorway but would
love to see a series landrover going down the fast lane 100+.
Has anybody made a super fast series landrover or is it virtually

Does anyone know what the purpose of the Panhard Rod on a Disco is? To me it
seems to stabilize the steering box only. Any knowledgeable persons out
there?
Frank

It seems quite a few newsgroups are not functioning as normal, also quite a
lot of messages are' no loner available on server'. Spring clean time???

How 'repairable' is the 300Tdi starter motor?  I've looked in the manual
I have and it only tells you how to fit and remove it.
I suspect that a build up of crud may be affecting the solenoid as
sometimes it's a bit reluctant to turn over.  In the past I stripped,

As Richard ( Mr Beamends ) stated. The Bearmach adjuster kit was superior
but I couldn't tell you why. The snail cam was slightly thicker. The cam
fitted on the drive slightly tighter. I had to make up the fitting just
like the BritPart one. There were no instructions for the LR. ...

I've noticed my 300Tdi Disco seems to be running a bit rough on tickover.
If it were a petrol engine you'd swear it was missing on one cylinder. Seems
fine at other engine speeds.
On further investigation I've found the sump to be pressurizing.Take out the

Simple question:
Can the 200Tdi cylinder head be skimmed ?
According to the service manual it can't, according to my engine re-bore
man, it can. Who is right !

Hi all.
Not the easiest to way up by description, but here goes. I always put
the clutch in before starting the engine, and when I do I get a short
whiring sound from the rear of the dash, ( rear of Clocks area Etc ),

A collection of old Land-Rover sales leaflets etc.. Some gems here.
http://landrover.vlothuizen.nl/show/model-all.html
It's just a shame that not all pages were scanned.