looking at buying a 1996 disco that has no fold down seats in the boot, are
these an optional extra?. is it easy to fit them? how much would it cost
roughly?
Paul.

In my defender TDI 300 from 1999 I still have the original seats.
When driving longer than an hour I get back problems.
Is it wurth getting a new seat to sit on ?
Or is it bether to get a whole new seat?

Has anyone any tips for pressing the new bushes into the top damper
eye?
Current plan is to draw them through with a long bolt and washer with
brake fluid as the lubricant.

Aye up,
Acquired a popping noise from the end of my exhaust when letting of the
accelerator. It's beginning to get worse I have replaced the exhaust
manifold and new exhaust but it is still popping..

Does anyone know if this is possible - and if so, where to find such a
seat?
Thanks, Jens

Just bought an 'official' Landrover CD for the Discovery, workshop manuals,
handbooks, parts lists etc etc.  Fine and dandy, I hear you all exclaim ...
well not bloody fine.
It's a CDR so files can easily be deleted or written over, or the CD made

Just Jetwashed the Disco to have a look for any 'marks' from the tyres,
and there are none .. What there is, is a shed load of oil from the
front left swivel, seals I guess (hope) .. I guess I'll use grease this
time.

I've got a website (www.richardsrovers.co.uk) that I did a while with
FrontPage 98 (I think).
I now want to redo it - whats the best and easiest (not expensive) software
to use?

Checking the fluids on "beast" and I have found the 5AM airflow meter has no
wire mesh inside! I have found some gauze in the panel under the windscreen
that looks as if it would fit.
It's running/idling fine on both Petrol & LPG, I thought if this was out of

I have just finished rebuilding a pair of front brake calipers for my
Defender. I would like to paint them to delay the inevitable corrosion, is
there a paint suitable for use in high temperature applications such as
calipers that anyone can recommend??

does anyone have an email address for the land rover press office?
Can't find anything of use on their website.
Regards.
Mark.(AKA, Mr.Nice.)

hiya
im after a rev counter which has to be the same size as a smiths oil
pressure instrument,
the counter has to be for a diesel, and id like it to go up to 5000 or

I'm missing something somewhere: I can't stop a vacuum developing in the
tank. It has a lockable cap with breather valves, which I've stripped
down several times to check/clean. As far as I can see, and gently
testing with the end of a paper clip, the valves don't stick, and ...

Series 3 2,25 PETROL
Over the last few miles the oil pressure light has been coming on at idle,
something that only used to happen if the oil level had dropped towards the
min level, on a 15 mile run last week the pressure light came on once the

Had a day out at their driving day in Grasby Quarry.
http://www.llrc.co.uk/index.html
Took my two kids, the wife and one of my kids friends, who all had a
whale of a time and thoroughly enjoyed it.  Eldest had a go in a