| Thread | Last Post | Replies |
|
| Funny rattly noise | 09 May 2005 08:31 GMT | 5 |
I think i may have narrowed down an annoying tingly rattly noise from the back end of my 93 disco. When you go over normal roads bumps, potholes, kerbs etc there is a tinny noise from the back end, if then do the same with the brakes lightly applied the noise has gone. Could it ...
|
| P38 Steering | 08 May 2005 12:50 GMT | 1 |
Can someone tell me if you can buy the steering track joints and drag link joints on there own or do they come with the bars attached??? and the best place to buy them from would be a great help. thanks
|
| Chrome ball oil seal? | 08 May 2005 03:02 GMT | 5 |
I'm fitting new chrome balls to my series 3 109. The new big oil seal is a very loose fit in the outer swivle pin housing. I'm worried that if I fill the housing with oil or grease it will all leak out very quickly. Has anybody any experience of this and any solutions.
|
| Ping: Derry Argue or Larry | 07 May 2005 22:12 GMT | 5 |
Having previously posted that my Defender Double cab had been stolen, it has now been found. However I am now about to start the old Approved Repairers assesment of repairs versus Approved Cash Value game. I have read an old thread relaitng to Derry's D90 and would appreciate any
|
| TD5 engine number location | 07 May 2005 17:59 GMT | 1 |
Have just bought a disco with a TD5. Dose anyone know where on the engine the engine number is located?
|
| Buying a disco number of previous owners | 07 May 2005 17:14 GMT | 5 |
looking around at disco's just wondering what people's views are on how many previous owners cars have had, i feel that the fewer the better. my thinking on this is if i buy a car that is reliable i keep it for year's, if i keep having problem's with it i get rid. preferably i ...
|
| Alfie has another encounter... | 07 May 2005 11:47 GMT | 7 |
...of the Vauxhall Corsa kind. Front wing, indicator, valance and bonnet. Opposite side to last time. :-( Only positive thing is I've not got around to painting him yet from the last
|
| Lightweight footwells | 07 May 2005 11:29 GMT | 6 |
That is footwells for a lightweight, not exotic material bulkhead panels.. Having spent the day removing driversworm from my bulkhead, got ready to weld the new footwell panels and drivers side outer panel when I realized I'd made a silly assumption.
|
| FA: P38a | 07 May 2005 10:33 GMT | 5 |
She's gotta go... No interest on this group before, but maybe worth a punt.. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4548338182
|
| FS..BFGoodrich track edge | 07 May 2005 10:05 GMT | 6 |
I have surplus to requirement 5 235/85x16 BFgoodrich track edge tyres with 8 ish mm, 2 v good 1 with cut tread but just surface and 2 with sidewall cuts. I think they aren't made anymore.
|
| JATE rings | 07 May 2005 09:41 GMT | 4 |
Anyone care to give me a brief synopsis as to use, fitting & how they work etc? Ta Nige
|
| Tallest wheels (not widest) on a standard 110? | 06 May 2005 21:38 GMT | 16 |
Hello all, am looking to get some new tyres in the near-ish future, and am a fan of skinny wheels rather than fat ones. Most of the past advice on the group has been about how fat you can get rather than how tall. I'd imagine that a thin tyre will fit better than an equivalent
|
| Best De-Greaser??? | 06 May 2005 19:06 GMT | 3 |
My 90 200tdi needs attention again!! I need to clean / de-grease my gearbox and transferbox (while in situ with tunnel and seat bases removed for ease) because its smells after a while on long runs. I figure once ive changed all offending gaskets
|
| Towing Mirrors | 06 May 2005 18:15 GMT | 10 |
Hi.......can anyone recommend a set of towing mirrors for a 96 Discovery ? thanks Jim R
|
| alloy wheels | 06 May 2005 12:30 GMT | 6 |
Excuse the ignorance but when it tals about 16" alloys what does the 16" represent?
|