I've a 1985 90 V8 and want to drain, flush and refill the cooling system.
I had a look at the weekend but couldn't find the right engine block drain,  
buggers at Solihull hid it behind the manifold, so not sure I can properly
drain it down. Also as the heater seems higher than ...

Just my tuppence worth.
OTTOMH could a Jackall or simlar be utilised as a press, reversing the
head unit, fabricating a block that will bolt to the rack as something
to push against and then using a bit of packing/shimming. I'm sure this

I'm currently replacing the drive member(s)?? on the landy (defender 110
300TDi 1998). The reason being the front passenger side one gave up at
the weekend. Great I've got the replacement, removed the bolts, and the
C-Clip and the shims, lots of WD 40, it moves out a bit (1/4 to ...

I've just fitted a pair of Wipac 8 inch spotlamps (they have 100w bulbs
fitted as standard).  When I turned them on for the first time I
noticed the inside of the glass lens has somehow misted up so the lamps
now have a foggy appearance.  It's not water vapour so hasn't

I was visiting Bell equipment yesterday. These guys make 50ton articulated
dump trucks amongst others, that are badged as either Hitachi, Bell or
Deere. Apparently one went up a close to 1:1 grade with a full load that a
landcruiser couldn't get up. (I know I am sure that a landy ...

I've done a quick Google but come up with nothing.
What are the recommended methods of installing new bushes without having
access to a press? Last time, I had two vehicles here and it was a simple
matter to take the bits to a local garage. But now I have just the one.

I've been looking for one of these for a while now, but thought the auto was
hard to get. Anyone got one? Opinions? I see a good deal in The Sunday Times
last weekend - http://driving.timesonline.co.uk/section/0,,13349,00.html -
very tempted.

Can anyone tell me if you can get an overdrive unit for this vehicle.and if
it will help with fuel consumption?
Regards

If I were to fit parabolix is it advisable to start with replacing the rear
first or ought one really to replace all four at once.
I have a suspicion that the springs at the back are rather tired given the
decided list to port at the rear, my recent additions have been adding some

i,m sure i,ve asked before but can anyone advise on tyre pressures for a
1981,ex mod,lwb,s111 with original mod tyres.cheers.
also "the ickeys" thanks for replying ref tailgate i got one 2 hours before
i got your mail.tried posting to you but mail was returned ! but thanks.

Ola,
before I commit to shelling out. Has anyone had any experience with the
cheap parabolics that Paddock sell?
Thanks in advance,

I have removed the body cappings on my 90 to get them galvanised. The ally
underneath is a white and powdery. Whats the best way to treat this before I
put the cappings back on.
Thanks

Hi I had my TD5 written off recently due to the Storms of Jan, two windows
broke and it was exposed to salt water spray for 12 odd Hours.  I have tried
to buy it back as I live on a Scottish island and it would come in useful
for allsorts of things. However my Insurance company ...

Hi guys,
I'm about to start looking for my first land Rover :D. I am looking at
buying a series 2 or 2a Land Rover. When i go to look at the vehicles,
what sort of things do i need to look out for on the vehicle?

Found this on another group, in case you are fed up of the little green
thing going ring ding ding ding everytime the adverts come on!
http://www.golakes.co.uk/baarmysheep/