| Thread | Last Post | Replies |
|
| Safety Devices | 27 Jun 2005 20:55 GMT | 2 |
I heard on the grapevine that Safety Devices have gone into receivership last Wednesday. Is there any truth in this? Brian Tonks
|
| improving ease of clutch | 27 Jun 2005 16:22 GMT | 3 |
This is all new to me, so go easy. I have a K reg 110 (200tdi) that my wife is finding hard to drive due to the pressure needed to use the clutch. i have spoken to a 4x4 dealer about this who has suggested it is
|
| 3.9 overheating | 27 Jun 2005 12:07 GMT | 45 |
I've just become the owner of a tidy RR Vogue SE 3.9; purchased it yesterday, all the electrics work, brand new tailgate, clean interior and exterior etc etc. It's done 114,000 mles, and upto 81,000 (3 years ago) it was serviced religously by the same LR dealer, and all the ...
|
| Seats for Defender 110 | 27 Jun 2005 10:18 GMT | 1 |
Well it has come time to rip out the seats from my 110. When I bought it, it had Volvo seats in the middle seats and although they are extremely comfy they are too large and are eating up space in the boot. So I want to change them back to middle row seats, preferably high back, ...
|
| glamorgan green lanes? | 27 Jun 2005 10:02 GMT | 1 |
Does anyone know of a group that has trips over green lanes in glamorgan? Or any organised days on forest trails? Many thanks Phil
|
| WTD: LT77 gearstick remote linkage casting 90/110 | 27 Jun 2005 08:31 GMT | 1 |
The remote linkage housing on my 90 fittled with LT77 gearbox just snapped in half and looks like it's going to be a nightmare to TIG weld and remachine. Does anyone have a spare LT77 remote for a 90/110 I could buy or know what the part number is (I am currently moving house
|
| Legality of no bumpers? | 26 Jun 2005 23:04 GMT | 45 |
Need to do some work to the front bumper, valance and other bits on my Discovery. been a tad over-enthusiastic off-roading and some bits are bent, snapped and de-ranged, so want to take all the front end off and re-arrange, paint, fettle and maybe even change some of it so it's ...
|
| Ping Beamends!! | 26 Jun 2005 14:10 GMT | 9 |
Richard, your mail is bouncing. A few of the bits are wrong matey. The pedal rubbers are off a later one as they are MILES smaller than the ones fitted to my 110 (1984) They look more like series rubbers than the ones you sent me. You also sent me two handbrake lever gaiters ...
|
| New toy time.... | 26 Jun 2005 09:31 GMT | 9 |
As the RRC is on it's last legs (the more i fix it, the more other problems appear!) I've been on the look out for a replacement. After a tip off from a mate, next weekend i shall be the proud owner of a M reg Disco V8i auto. Took it for a quick blast up the road, 'box changed up ...
|
| Argh Fuel Leak Carburetter | 25 Jun 2005 19:10 GMT | 7 |
Hello Problem pages. Just started my engine v8 110 1988 and it just start pissing out fuel from a tube the twin carbs on drivers side. Averted a fire by lots of soapy liquid. need advice quick on prevention
|
| designa chassis info wanted | 25 Jun 2005 12:22 GMT | 2 |
hiya, does anyone have a working web site or phone number for designa chassis, as i hear they sell modded fuel tanks. cheers
|
| Mind if I step in? | 25 Jun 2005 10:56 GMT | 4 |
I'm in the US and was looking at our wide selection of gas guzzling monsters and just for giggles, I clicked on the dealers basic choices which was "Suv" and price. Came up with nice looking Range Rovers.
|
| Budget Sandblaster - Machine mart - Views | 25 Jun 2005 10:46 GMT | 16 |
Any one got one? http://www.machinemart.co.uk/product.asp?p=000510004 I'd like to know if it would be any good for.. 1. Cleaning the oil drips from block paving (specifically patches rather
|
| Diesel pump | 25 Jun 2005 09:35 GMT | 12 |
Can anyone tell how to adjust the diesel pump on my 1980 series III. Just failed the MOT on the smoke test. Have been told it is pumping too much fuel. Thanks
|
| 90 Exhaust Probs - thoughts please.. | 25 Jun 2005 09:25 GMT | 2 |
Rear box of my tdi 90's exhaust fell apart at the w/e. Bought a new section today and prepared to remove the old... Working from the back of the l/r I could see the rusted bolts through the compressing rings holding the middle and rear sections together and thought
|