Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Land Rover Cars / June 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Disco curly dash! + Disco for sale22 Jun 2005 23:27 GMT4
I have tried to part ex my 96 disco td. After being insulted, one of the
excuses they used was curly dash. I have been shown a bit of plastic which
clamps it down, but at £150 it is expensive. WIWLTK is does any of you
experienced chappies or chapesses have an economical solution to ...
range rover 4.0 help !!!22 Jun 2005 21:48 GMT3
i have this problem:
when i start the car the outside temp is 0 (zero !!) and the cold clima not
run. i wait about five minuts and the outside temp is going up to the real
temperature.
Door Mirrors22 Jun 2005 13:46 GMT5
Anybody know if the door mirrors on early discovery(1990) and Range Rovers
of that period are the same(similar)
--
dp
Series 3 LWB chassis repairs21 Jun 2005 23:19 GMT1
I need to do some repairs to the top of the chassis rail above the front of
the rear spring hanger. (I have a MIG welder) I was considering removing the
floor to gain access to the top of the rail. (I don't want to remove the
rear body if at all possible) Is this easy to do? Has ...
Land Rover World Show @ Eastnor.21 Jun 2005 22:51 GMT17
Seemed to be some traders missing this year and a lot more non land rover
vehicles.  Bit disappointed in comparison to last year.  Got a few useful
bits, but who wants to go and look at toyota hi-luxes and nissan whatevers?
What strings were pulled to allow them on the hallowed ...
Servicing a disco: next question21 Jun 2005 17:29 GMT1
(thanks for all the replies to my earlier post)
I'm still trudging through servicing my disco 300tdi (1998)
What is the brake fluid capacity (its not in the handbook or haynes) ?
Also, when I changed the axle oil - it was a tan colour from
ABS pump21 Jun 2005 17:26 GMT7
on a p38a rangerover m reg
problem
sounds like a coffee granulator
stays running for 20mile drive
Air con 2000 4.021 Jun 2005 16:29 GMT1
A/C stopped working on RR 4.0. Had car from new (July 2000) and no problems
until now. Any suggestions as to the likely cause?
David
Changing 4x421 Jun 2005 16:02 GMT14
My son has asked me for advice and wonder if anyone here could help with
suggestions.
I have a 110 2.25 hardtop. He has a Jeep Cherokee 4.0L auto, which is
reliable and he likes the image of.
Propshafts21 Jun 2005 15:49 GMT2
The Range Rover Book of Words is quite clear that the prop shafts are
both fitted with their sliding joint to the front.
Why does it matter?
Every Range Rover and Land Rover I've owned (bar one) has had at least
Disco spec21 Jun 2005 08:14 GMT7
Thinking of a s/h Disco 95/96 ish for caravan duties. Cannot make out from
Parkers Choice mag diff between 200 tdi or 300 tdi. I would like an auto out
of choice.The engine size seems the same is the power different? Any other
details I need?
oil O ring leaking on transfer box defender td521 Jun 2005 08:10 GMT2
i drive a Defender TD5
I have probably a O ring leak coming from the top ? of my transfer box
Thats what the LR dealer told me it is.
Is it expensive to replace?  Or better: How much time does it take for a
FOR GODS SAKE HELP ME.21 Jun 2005 07:21 GMT2
Hi guys,can anyone help me find a tailgate for a 1981 s111 ex mod lwb , as
the tailgate monster seems to have eaten them all !
p38a rangerover breakers ?20 Jun 2005 21:06 GMT1
does anybody know of any ?
looks like I am going to be looking for a new abs pump !
landrover price £837 !
near to herts would be useful .
Leaded / Un-Leaded Help20 Jun 2005 20:45 GMT10
I have just got my 1986 110 v8 back on the road after two years. Problem
is I can't seem to find leaded petrol for sale anymore.
Is it ok to run it on unleaded with a timing change or do the heads need
to be changed?
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 May, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.