Just got my first PDA.... I know how my Dad felt when he got his first Video
now ;-) ....ok perhaphs I exagerate a bit. Anyway... anyone recommend any
useful toys relevant to our hobby?
Is there a way to view acrobat files such as manuals? That would be handy

96 discovery. Was close to home the other day and the temp gauge started
creeping up, continued and by the time I hit my driveway temp was getting up
there but not critical according to the gauge. Stop the engine, fan stays
running, coolant running out slowly onto driveway. Coming ...

left good starter standing for a few months
will not start without startezy spay
glowplugs not seen to warm indicator light on
i suspect glow plugs or accidental petrol top up

After a disastrous engine failure due to overheating, a brand new diesel
engine with a reconditioned cylinder-head has been fitted to my 110 TD5. The
year 2000 model has done 165.000 km (17.000 with me).
The LR workshop has replaced all hoses (they looked perfectly ok to me, but

       Would it be ok to post details on here of a Landrover which was
stolen yesterday (Friday) from a friend of mine in the East Manchester area
with a view to replying to the post and/or ringing the Police if anyone sees
it?

I got some xylene (?sp?) absed paint from the paint man at Gaydon for Morph
in Desert Sand (Wet sand not dark, but light and wet IYSWIM ;0) )
Now I know I need to use Acid Etch , then a primer. I have some primer left
over from my Cellulose job on Alfie (the now all Blue again ...

I finally got my slave cylinder in the mail today.  I rushed home to
install it; it was a little different than the one that was on there (I
suspect it was not correct).  I bolted it up and it fits just fine.
I went to attach the hydraulic line and noticed that the compression

I have a low lileage 3.5 V8 just pulled from my 101 Ambulance. Anyone
here interested. No serious offer refused. Known runner. Just want more,
efficient power in the 101.
Failing this appeal, any suggestions for a market place ?

can anyone tell me will a roof rack (basket type) from a sereis landy fit on a range rover classic thanks

Afternoon all,
I have a pair of Travel Spot headlamp beam adaptors, the sort you buy in
Halfords.  Sadly, a Defender is not one of the models listed on the fitting
list!  Anyone able to offer help about how to fit the things?  It's a 2001

Check this out... From the BBC website:-
A number of Greenpeace protestors have entered a UK Land Rover factory and
disrupted production at the plant.
The environmental action group says 35 of its members breached security at

My Landy is going, however the temp sender on my 3ltr v6 essex motor seems
to return a steady 0. I have tried to connect the sender wire to the block
as advised by a auto elec and that did indeed send the temp gauge full scale
as he suggested it should, presumably meaning that ...

Any have recomendationf for a good LR dealer in Souther England (
Hampshire )  I was thinking of buying a reconditioned 110 from
Liveridge or TJC ?  Also though or broklynn and LD & TC Willetts in
Grantham ?

All,
I want to buy better (mainly higher) seats for the second row of my 110.
I know of exmoor trim.  However, there was a post earlier here that was
reporting a not too good view of their products, they are expensive (the