Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Land Rover Cars / August 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Those concrete vehicle barriers...12 Aug 2005 19:48 GMT22
...seem to work pretty well:
http://www.101fc.net/files/vids/VehicleBarrier.wmv
Disco cooling problem12 Aug 2005 16:27 GMT3
Anyone know the answer to this puzzle ?
My Td5 boils over and loses a small amount of fluid after any reasonable run
when it get up to temp.
.
insuring an oil burner RR12 Aug 2005 12:32 GMT1
Before I trade insults with various brokers, and chickens if you believe the
adverts, has anyone with a rangie with a replacement bigger engine - in my
case 4 litre Turbo Diesel  ( grunt grunt more power) found a sympathetic
insurer
Replacing Defender heated rear window glass12 Aug 2005 10:00 GMT2
On my M reg Defender H/T the heated rear window is almost defunct in
that only about two of the cross wires actually demist.
I see new  glass are available so I was toying with the idea of
replacing it.
bump stops12 Aug 2005 08:29 GMT1
Hi all, are the brackets which are welded to the under side rails on old
Range Rovers which hold the bump stops obtainable as a part to weld on, mine
have rusted away.
Rich
Trim panels in foorwell of 11012 Aug 2005 00:27 GMT5
On the sides under dash, can they be obtained cheaply?
Mine have rotted away to nowt!
Nige
Rear door with no paint on!11 Aug 2005 22:04 GMT4
I intend on repainting my whole 110 CSW from dysentery brown to another colour soon enough (could be
months etc) I have a new rear door & the old one is buggered. Not wanting to paint the thing twice can I
fit it as it comes in primer & if so for how long? I need to get moving on ...
Clonkety clonk11 Aug 2005 21:28 GMT4
Not being used to autobox, mine has developed an annoying clonk.  Vehicle is
a 3.9V8 Disco Auto M reg 98,000 miles.
This only happens when going from 'D' to 'R' or vice versa.  It only happens
if i change straight away, even going from D to N then to R does't help but
Sureterm direct breakdown cover - problems11 Aug 2005 10:34 GMT15
    Just want to make you aware of this in case you have fallen into this trap.
I have just been on the phone to sureterm, to renew my insurance and to
continue with their breakdown cover.
Credit card details handed over and then i was told - your landrovers a
101 Radio Body Panels10 Aug 2005 22:41 GMT12
How the heck do you remove those blasted triangular panels from behind the
door that always rot?? Have done the ones on the GS and they were a pig, but
these look impossible without removing most of the back!! Surley there is a
trick to it - I hope!
Okay depress me - fuel solenoid or pump10 Aug 2005 20:55 GMT7
Vehicle Defender 110 , 2.5TDI 1991 CSW
Fault: getting through a fuel solenoid every 1000 miles (getting stupid)
Today again it broke down and the fuel solenoid was faulty. New solenoid and
works fine. I did notice last time it happened was a piece of silvery metal
rear reflectors10 Aug 2005 19:39 GMT6
Are the little red reflectors on the back of 101s mandatory for the MOT ?
Ta.
Steve
Insurance Jonahs10 Aug 2005 18:20 GMT13
So much for all those insurance Jonahs who have been saying that if you so
much as put a cigarette lighter in you invalidate your insurance.
My insurance comes up this month so I though I might as well tell them that
I have taken the seats out the back and converted the thing to a ...
110 outrigger replacement10 Aug 2005 15:56 GMT1
The front nearside outrigger on my 1983 110 CSW now has more holes than
metal and I think it is time to do something about it - not sure whether to
go DIY or get it replaced by a local workshop.  What is involved and is it a
difficult job? - I know one end of a MIG from another, ...
P38 speed pulse signal for GPS sat nav10 Aug 2005 08:57 GMT1
I'm after the speed pulse signal for a P38 so that I can put in a blaupunkt
GPS sat nav.  I have been told of a wire that conects to the speedo but I
want to confirm it before I go any further.
Many thanks
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 July, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.