My 200Tdi has never had a cold start light that works, although the
heater relay can be heard clicking in and out, so starting is no
problem.
However, I would like to have the choke light come on when the heaters

Can anyone recommend someone to service my 110 300 TDi in the area around
Redditch Worcestershire
Regards
Thos

Anyone know where I can get the best price on replacement front air bags
(springs)
Martyn
#####Reply to: info at onecal dot co dot uk#####

Standard type, gonna get em blasted & primered so not arsed about colour.
Could do with all 5, but ones & twos would be fine!
Pref in Yorks/Lancs/Liverpool for pickup, all places I live or work!
Ta

post issue test

All,
After moving the passenger seat forwards yesterday on my '96 Discovery,
it now won't move back. I swapped over the switches situated on the
side of the cubby box and it moved back fine using the drivers switch -

My Grizzly Old insurance company (NFU) have added 20% to my policy
because I have had my 90 chipped :-(. The said they realise that it does
no really add to the top speed but it does add to the acceleration. They
make it sound like I am going to do 0 to 60 in about 3 second!! I ...

V8 gurus (Badger+others!) I have a 4.6(bitsa engine) which I've just
taken the head off, it's got a 1998 date code on it.  It's got 10 bolts
holding the head on in two rows - are these stretch bolts at this age?
Valve stem oil seals - how are these meant to come off - is there a

My old k reg dissy, gives a real clonk if you go round a roundabout and then
straighten up. It appears to make the floor knock, in other owrds you can
feel it as well as hear it. It seems to be similar both sides if you turn
left or right. Theres some take up on the drive assy ...

Preparations are underway at a pace and U decided that to stop people
borrowing things out of the boot on our Afrtica trip I would fit rear window
guards. Anyway I watched e-bay for Defender 110 guards and none came up. So
I contacted Mantec. I was quoted £247 (UK) which seemed a ...

Does anyone have the specifications for either the TDi or TD5 Commercial
please?
regards
T

I saw on An MG is Born Mr Evens using a two part epoxy to glue bits onto the
vehicle. Now I understand that it is not for structural type repairs but I
could use it to add backing pieces to some of the rips and holes on my Srs11
tub prior to filling and repainting.

Does anyone know the cheapest place to get 90 Mud Flaps (TD5)? and how
much they are roughly?
I seem to have lost one from the front and one from the back :-(
Thanks

I've had a number of requests recently for a part to replace
the brackets on the rear axle tube of (mostly) Discovery I's.
I've now found someone daft enough to make them, but I need to
work out how much they are worth (i.e. based on how much they cost

I will try and stay coherent.... a bit long, sorry, but no-one else to talk
to (how sad is that!).
I have a 1995 3.9 V8 ES Auto which I bought with 12000 on the clock in 1996.
Since then I have worked it pretty hard (tow 2 tons all over the place) and