I don't have Sky TV or Men and Motors...
This weeks Used Car Roadshow was filmed at Eastnor Cartle LRW show,
can anyone do a rip of it for me please - or more importantly, any
footage they had of the 101 Club stand?

just been checking over the engine bay and noticed that near each head light
there is a lead with a white plug attached to it. anyone know what they are
for?

Anyone here going to Langley farm thingy in September?? I might go along for the laugh.
I have only met two members of the group in person!

200 tdi engine
Is it possible to get another block? as the piston rings have worn a bloody
huge groove in the bore, and I've been told its beyond repair.
Failing that, whats a head etc worth?

With turbo, gear & TX box, not making much at the minute. He wants £280 for the whole lot, could be
useful for a rebuild out of the car whilst keeping mobile!
I presume it's an LT77 & 230 TX box. I think I'll stick a bid on it, it's gonna be heavy, would I be able
to chuck it in ...

What is the current thinking on using one shot grease in Series
swivels?
I know when it first appeared it was said it was not suitable due to
the fact it wouldn't lubricate the UJ or swivel pin properly. By now

I decided a few weeks ago to replace the worn/soft suspension bush's
So all duly replaced. I used Super Pro polyurethane except the panhard rods
which I used genuine. Leaking shocks were replaced with oil
replacements(Armstrong,

My series IIa (2.2 petrol) used to tickover very nicely but has been
getting rougher and rougher over the past year.  I have tried most
obvious things - new carb (twice), new HT leads/distributer/plugs/coil
but its till runs like a dog at tickover.

can anyone tell me how i can check if my brake problems are from
the vacum pump or the servo?
brake pedal goes hard at low/idle revs?
TIA

Austin, go see your bank manager, this is the vehicle everyone thinks
you should own...
http://www.101club.org/sales.php

What can I say, on reflection I think I would prefer to set my nuts on fire & put them out with a mallet
than go through this filthy, dirty bloody horrible process again!!!
Still, it's now done & all there is to do on the chassis is replace an old patch that's looking a bit
rough. ...

Just been reading Ashcroft transmissions tech stuff about this gearbox, they recommend Dexron ATF?? Is
this right, mines pissing EP90 out of every hole possible? I can tell it's EP due to colour & cat piss
smell?
Is this right or what?

does anyone know the thread size of the  radiator and water pump plastic
bung. i want to change them to brass before they break.
paul

hi,cant seem to find out anywhere do i have to alter the lights on my 04
disco td5 to drive in france keep reading about putting black tape on the
triangles but cant seem to see any on mine?
please help i'm off on friday for the first time

My Main Gearbox has no Fillinghole on top.
The Brass Nut just in front of the cover with ventilation hole for the
transferbox, covers a spring for loading the 3-4 gear selector ball.
I filled oil thru the levelcheck hole on the side of the main box.