Over the past year or two, the "Check Engine" (EFI) light in my '93
Range Rover 4.2 has occasionally come on while idling.  Sometimes this
comes with a rough idle, sometimes not.  In the past, I have simply
reset it by pulling the negative lead from the battery and all is well

usual sources of info having failed.....
Does anyone have the part number for a 24v 4-cylinder Series ignition
coil, and even better, anyone got one (needs to be new, it's going
to Latvia)?

Piglet is sulking, 'cos Owl is in LRE and LRM......
I am sulking cos neither have been delivered :(

Okay guys and girls I need your brains and wisdom,
I am 8 weeks away from my Africa trip and some 10000+ miles of interesting
driving. I have looked at Exmoor Trim and BLRS and I have decided that i
need to change the passenger and drivers seat in my Defender 110 2.5TDI CSW,

had a flat on the disco today, took it to get repaired and they could not
because the puncture was on the edge of the tyre wall. having a new tyre
fitted tomorrow £62 but have just read that tyres should be replaced in axle
sets. just had the disco before and aftered so cash is a ...

I'm going on a long overland trip with a lot of off-road.
With a 1998 Disco.
I've been thinking of taking the spare wheel off the back,
and putting it on a roof rack, to reduce the liklihood of

Further to my previous post, the tyres at the moment are Michelin XPC. The
tread depth on the fronts are 4mm. Whilst I know they are still legal does
anyone know the tread depth when they were new ?
The reason for asking is the last couple of days when going round a

in same boat as above with the taxman
what would a 54 plater landmark-7 seater  with 36,000 on be worth? 10 months
tax side steps and the number plate,
TD54 FUN

I need to replace the floor on my 109. Does anyone know where I can get a
sheet of Ally (plain or chequer plate) about 2 mtrs by 36 in the south west
london area (surbiton)
Thanks in advance

Morph is still in bits and the heads are at the local machine shop for
reworking... stud holes for manifolds and valves replaced and ground is as
required with new valve guides too.
Anyway, while Morph ois stripped down I was pondering the issue of the poor

How can I tell which gearbov I have fitted in my  V8 110 CSW 1989? Suspect
its either the LT85 or the LT85 light weight. I am led to believe these run
on engine oil but the oil in there smells like gear oil.
Gerald

Hi i have a 1987 110 Land Rover and i would like to know if you can fit
discovery wheels on it?I have phoned two Land Rover dealers and the
best answer i get is thay think disco wheels will fit.Can anyone help
many thanks

Reluctantly I have decided to sell my TD5, the taxman is just too greedy and
I will be looking for a really cheap disco to use as a play thing and will
replace this with a commercial of some sort.
OK here goes,

I'm looking at buying a 2003 Vogue TD6 Range Rover.
Dealer is asking for 34k  with 33k on the clock.
Seems like a fair price?
Im upgrading from a 2.3 Ford Galaxy

Does anybody know if the "Honda Genuine MTF" is really the Texaco
MTF-94 ?
thanks
Pat