A few weeks ago I took my car into a service place known to a few here
for a timing chain - when it came back they said that the timing had
been a tooth off on the chain and that when they put it back on
suddenly the car wouldn't start - we'll need to sell you a new injector

Ok I managed to loose a bolt. It's the one on the V8 which holds the Dip
stick clamp and actually fastens into the one off head bolts.
Any one know what it is? Can't find it on my parts lists.
Lee D

   Now that the cold weather has arrived I have just rediscovered how poor
the heater in my disco is.Is this just mine or are all others the same?
                                               Alan

You have mail .....

Does anyone know where I can get one of these in the UK?
       Cheers, John

Waved goodbye to the Disco a few minutes ago...  damn good car that was...
happy memories...
Now just need to get the RaRo back as I'm currently Landroverless.
D

There was muche of snawe and ise in thos farr off dayse.  There was a
scrivener of Londoun yclept Geoffroy Chauser, and he a Lande Roverre hadde.
On a daye, he gotte stucke in a drifte of snawe and was sore pyssed offe.
With muche lucke, there was a compagnie who could supplye ...

Well, today I managed to get the cylinder heads back on. Spent alot of time
preparing everything in readiness for the rebuilding. Morph sadly has a leak
on his roof...possibly due to being parked on the flat so I've never noticed
it before (normally parked on a slope). Needless ...

Whilst topping up my washer fluid today i noticed some perished rubber hoses
nearby. Theres one coming from some kind of throttle actuator, the cruise
control i would think. Theres another bit with a tee bit in it, but the
bottom bit has fallen off. It's all in poor shape, has ...

Got one of these lumps in my s3 110 and I am trying to get a crank case
oil seal for it I have been told that its not available as an
aftermarket part anymore !
Any one have any ideas were I can get one or if it is a standard part I

Perhaps someone can give the benefit of their technical knowledge, I
have recently discovered air being pushed out of the gasket under the
rocker cover on my 110 2.5D. I have ordered a new gasket to replace the
old grotty one, but a number of people I have mentioned this to have

I'm away (in Barbados, go on Christmas day!!) for a week due to working
65-90 hours a week for the last 12 weeks, but, I am on holiday with my
little girl for another week after that (building trade you see)
Owt going on up norf? I'll even travel in the LSE (I absolutely LOVE this ...

yes it is that time of the year, but until it gets here we never know just
what will fail. Right Sunday morning very cold and frosty, go out to my
Disco insert key, wait for the 'pig tail' to go out, three times to be sure
and try to start. The engine seems to attempt turning but ...

Just used a composit valley gasket with a smidgen of hylomar around each
port.
Morph now refuses to fire up. ....H'mmmmm
Whats the verdict...who would / wouldneya use anything or just a bare

Can anyone recommend me a a good source for secondhand  Discovery parts (
wreckers / recyclers ) pref Vic, but nation wide would suffice..
Australia...that is :)
I'm after a few interior trim parts for my S2 Disco ( grey int )...