eating cheese before bedtime can result in strange dreams.
Last night, for example, I had a very clear, lucid dream wherein all the
usual suspects were at some LR show, which must've been in or near Matlock,
'cos at some point a subset including myself and Martyn went off to visit

at around 30mph, doesnt do it on acceleration & it still does it if i coast in neutral.
It's not bad, but slightly noticable, feel like the effect of having slightly knobbly tyres on, but these
are Michelin road tryes.
Nige

Finally got the safari snorkel on, buy only dry fixed.. Going to play with
silocone this afternoon!
When all the silicone is dry, if ive done it right, if i put my hand over
the top of the snorkel, the engine should stall.

Can anybody recommend a company in the Birmingham area that 'chemically
cleans' engines, after dismantling mine, it looks like it's been cooked in
Bovril.
Also, what's involved in renewing the cylinder liners, is it an easy DIY

Can anyone recommend somewhere where I can get reasonably priced battery
(coventry area)?  Haven't been to Halfrauds to see what they've got...what
about tyre places?  Are they reasonable or extortionate?

I've acquired a set of four new wheels and new tyres at the best
possible price (!)...
The tyres are 205 wide.  The wheels are 7J and look a bit wide for the
tyre.  Are they too big or will they fit OK?

I am making up a bracket to carry two spare tires on my trailer. My
trailer runs on Old Landy tyres that came off the SerIII, however I am
currently towing with a Disco Ser1 and might at some stage replace
this with either a Disco Ser2 or 110 Td5. Do all these products use

my tdi 300 rcl suddenlly stopped working, changed the fob battery but
nothing, does anyone know the location of the sensor that picks up the
signal from the fob
thanks

Thanks to you chaps who kindly responded to my brake upgrade post. Every
little bit helps, it's great to hear your point of views and the information
helps to reassure me that I'm going in the right direction...
Anyway, I'm planning on upgrading the brakes mainly because it looks ...

I've managed to snap the drain plug (the one above the starter motor) on my
2.25 petrol.  It appears to be cast iron.  It's in a right mess and has to
come out .  Whats the best metod of doing this?
Thanks,

        I have got a (new to me) series 2A and am in the process of getting
it ready for an MOT.
BUT the brake lights just won't work
It has got a negative earth.

I need half a litre of paint for touching up the cosmetic imperfections on
my 1988 90 hardtop.
It's either Marine Blue or Shire Blue. Anybody know where I can get the
stuff?

How many Kg's or CWT is a 3.9 V8?
Cheers.

Not that I really  need one , I have an ancient one in the garage to bump my
head on and  I think my dads old one is still round in my mums lockup but
for the money ?? see  page 4 on 17th Jan
http://www.netto.co.uk/internet/nettog/menu/main.nsf

... some Welsh cheese!