| Thread | Last Post | Replies |
|
| In at number 39.... | 26 Feb 2006 23:57 GMT | 7 |
Ok... play this and we are sure to get about 3ft of snow. <http://www.zippyvideos.com/3713476973490146/disco_song_1/> Lee D
|
| heater for 2a | 26 Feb 2006 22:51 GMT | 12 |
I have got a series 2a with no heater. Does anyone Know if it easy to put a heater from a car in or is it best to use an original landrover (remembering the word HEATer) thank for any thoughts
|
| Sprintex Supercharger | 26 Feb 2006 20:20 GMT | 6 |
PLEASE HELP I have purchased a sprintex supercharged engine that was fitted into a wood and picket Range Rover. When we came to look at the internals of the charger we have found that someone has taken one of the internal screws out. I need
|
| Spring rates / length table? | 26 Feb 2006 19:52 GMT | 3 |
I know this has been asked before but does anyone have a link to a list giving the rates and lengths of LR coilsprings. I would be very grateful as it would help a lot in working out the specs for my latest venture...... David
|
| Add-in Lumbar Support | 26 Feb 2006 17:52 GMT | 1 |
Anyone got any thoughts or ideas on where I can source the inflatable / electric lumbar pads that I know are available as add-ins? (I'm posting here as it's something I recall from my Landy driving days - - - ) Ideally, from somewhere in Glasgow, Edinburgh or Carlisle who would ...
|
| of sealing wax and airtools | 26 Feb 2006 17:41 GMT | 6 |
I posted a while since about the fudged gasket in my Air Impact driver.Well I managed to get a spare from a friendly specialist Air tool guy and he has ordered me a couple of spares so if you get stuck drop me a mail - cost plus a stamp but I noticed Aldi are flogging them ( A.I ...
|
| Defender TD5 handbrake adjustment. | 26 Feb 2006 16:04 GMT | 5 |
OK guys - can anyone clue me in on where I adjust the handbrake on a TD5 Defender? Feeling round the drum backplate I was kinda expecting to find a nice little square adjuster-head to tweak, but from this morning's explorations I find.. nothing!
|
| FA:Range Rover Classic Bits & a Very Tidy LSE | 25 Feb 2006 23:35 GMT | 17 |
Some non LR stuff too sorry! http://search.ebay.co.uk/_W0QQfgtpZ1QQfrppZ25QQsassZbigQ5fnige Some bloody timewasters on eBay Nige
|
| Newbie Mechanic Help | 25 Feb 2006 21:08 GMT | 4 |
I purchased a 2002 FreeLander in March 05. I use it for my work and have put about 60K on it in a little less than a year. I need to find a good mechanic in my area, before the dealer takes my life's savings. Please, any help in the MD area??
|
| 110 mot result | 25 Feb 2006 17:48 GMT | 8 |
Well........ it passed I relined rear shoes before taking it and cleaned up bad indicator connection on the ramp. Now all i have to do is sort cam shaft rattle out ( hence much ooming and arghing in previous post) and jobs a good 'n'.
|
| Very silly question. | 25 Feb 2006 11:42 GMT | 10 |
http://cgi.ebay.co.uk/LAND-ROVER-110-Series-3-Diesel-2-25-LWB-Recon-engine_W0QQi temZ4613869721QQcategoryZ29748QQrdZ1QQcmdZViewItem Have a look at the first question on the above listed land rover. I thought it was very amusing.
|
| Fuel Guage and Sender | 25 Feb 2006 09:34 GMT | 3 |
Anyone changed the sender for the fuel guage (ie the electric bit that sits on/in the fuel tank and send the reading to the fuel guage)? My fuel guage itself is suddenly reading only part full / empty no matter what the fuelk level and its very frustrating - not to mention risky ...
|
| Still some bargains to be had on ebay..... | 24 Feb 2006 23:24 GMT | 8 |
Somebody just got themselves a very cheap 101 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4612924655 Alex
|
| Front disc rotors on '03 Disco | 24 Feb 2006 22:39 GMT | 12 |
The vehicle has 38K miles and general braking performance has never been a problem except for a squeal when braking lightly at low speed. The dealer reported that the front disc brake pads had plenty of wear remaining but the front rotors had worn too thin! The service tech ...
|
| 101 Eberspacher troubles | 24 Feb 2006 13:59 GMT | 11 |
Eventually managed to get the thing working today on heat setting. Have repiped all the fuel lines, as the old ones were more leaky than a sieve! However, I switch it on, everything runs, fuel is delivered and it
|