My 2.25 petrol engine has just started to do this today, on the overun when
I am slowing down for a juntion or traffic lights it backfires and dies, it
takes one hell of a lot of revs to keep it going. However when I am
stationary it ticks over fine. Any ideas?

Wotcher.
I'm looking for rubber rope for tying down canvas tops, not the cheap
"shock chord" that you can get from the DIY shops, but proper black
rubber rope.  Also clamps for use when making eyelets in it.  Anyone

How can I check if the water pump is working?  New to Series and need lots
o' help.  Rover is dumping coolant into the overflow tank.  I have a new
Termostat and hoses and will replace on Tuesday.  Just wanted to know how to
check operation of water pump. Thanks in advance.

Disco failed the MOT today, shocker bushes, rear brake pipe lines, slack
front bearing (advisory on this).
Now I was dreading doing the pipes, did em in less time than it wook to get
the tools out and set up.

Called yesterday  to check on the progress of an oil cooler I have ordered
for my
Range Rover, (It's still for sale all reasonable offers considered,
Seriously............) and was told,

And the frigging air con in the Disco has finally given up.
Buggered if I'm paying £87 to Landrover for the pipe, Any one know what
these Air con pipes are made of? Can I braze repair it or better still if
it's a common garden material make up a new pipe... not 100% how big the

Still pondering the "Greece Ball tour" and the more I think about it the
more I'm off the idea, would be worth while as part of a bigger tour though
(time wise).
However , and not forgetting we're thinking along the lines of Summer 2007,

It keeps telling me when indicating left that the bulb has failed at the
front. Sometimes it works ok, I'm hoping just a loose wire, anyone know of
any weak spots before i get out me meter?
Ta

Looking in the latest Bearmach Accessories Catalogue there is rear
anti-roll bar listed for the P38 Range Rover, however my local supplier
says it is no longer available.  Is there an alternative part?
Cheers,

Well thanks for the input on my non-existent indicators. They are now fixed.
I merely poked around the fuses a bit then took out the hazard switch,
fiddled with it, glued up the broken switch plate (where can I get a new one
of these then? The one to the right of the steering ...

Quick question:
I'm doing the front swivels on my old 1990 Disco and I've noticed that the
track rod has a slight bend in it at the point where the steering damper is
fixed. Is this correct or is it bent?

Sales video (needs windows media player...) from Pinzgauer: -
Pinzgauer Video
<http://www.automotive-technik.com/user_files/video/Pinzgauer.wmv>

Need advise with my MPI Disco; been tried to replace tensioner and
belt, still the same noise when turn on the air con. what should i do
now?

Any one used these?
http://www.speedbleeder.com/
Don't need them right now but I bet they would be worth there price on a
newly fitted system. Especially the likes of the 101 which are legendary in

I thought I'd take the scenic route back from a visit to my parents in
Cheshire to my home in Bletchley today and take in a few lanes. So here
they are:
<http://www.wayfinderproject.co.uk/?uid=SK0171-3a>