i never knew it would give me so mutch troubble,
engine's almost wasted, so i did a rebuild.
crammed it in the 88lw,
the turbo exaust was just above the steering box arm....

After spending most of a blisteringly hot afternoon under the 90
replacing the middle exhaust section, the most frustrating part was
replacing the rubber hangers.  So I know for next time, are there any
wise tips from the group for getting the rubbers over those barbed hooks

Can someone help with an item to keep my upright tool chest tidy? I'm
looking for something that will store my spanners in one of the drawers,
something like a rack. I remember a mate saying he has some that are simply
bits of plastic racking shaped to take spanners with self ...

Hi, having made a tit of myself enough times attempting to manouver trailers
with my land rover I've decided to go on a course for a bit of professional
tuition...
Course supplier says he will do two people for the same price; it's easier

Just serviced my newly aquired 1973 Carawagon, put a battery on her and
turned the key....
As soon as the ignition lights come on there is a loud clicking noise coming
from the fuel pump... this clicking is in fact so fast that it almost sounds

Has anybody ever put a Tdi engine into a Range Rover Classic - 3.5l Carb,
4 door 5 speed? I know they came out with them but not here in South
Africa.
How difficult for the home DIYer? Maybe a 300Tdi to match my Defender.

This guy tried it on in court obviously didn't read the manual before he
made an arse of it
.http://news.bbc.co.uk/media/avdb/local_tv/video/9012da680048ce8/bb/09012da680048
ebe_16x9_bb.asx
and yes he did lose the case reason- lack of (his) offroad driving ability.

Greetings one and all
Vehicle : Discovery V8i ES - Nov 94 (95M/Y)
Hocus pocus surrounding the braking - see earlier thread - has been laid  
to rest.  Until further evidence rears its ugly head I'm gonna put it down  

Can any body tell me why my series 2A Fairey Over Drive is so noisy, I am
assuming the noise is coming from the Over Drive but not completely sure, I
admit that I am not a mechanic and this has beaten me so far.

Evenin' all,
I've bought a new trials machine today, bit of a monster but perhaps a
bit TOO modified for my liking! The builder has modified the engine a
fair bit and his final crowning act was to top the engine with one of

The cable connector has become detatched from the heated rear window on my
110. Is there some sort of glue that will conduct electricity thaI can use
to refix the connector?
Gerald

The lumbar support has died in my 1997 Discovery on the drivers seat - the
knob just turns without anything happening to the support.
Has anyone ever had the seats on a Discovery apart?  How do you get inside
to get at the lumbar support unit?  Do the seat covers just slide off?  Or

i have found a huge amount of water in ther rear lockable storage box
where the jack is stored, how an earth di the water get in here???

98 110 CSW, the immobiliser has given me problems in the past resulting in
getting an upgrade from LR for the spider that failed after 11 months ( in
rural  France !!! ) this was then replaced under warranty again.
Being the cynical type I would like to remove the bl***y thing ...

Rich, I read your email as it disappeared into the spamtrap :-( it never
made it as far as my email client unfortunately hence I don't have your
address to reply to but in answer , yes you should be fine just spectating
as no doubt we will probably be doing again.