Right - Turns out not to be my router, so ive gone and got it from the
bottom of my garden.
I cannot browse at all now... But i can radmin over the internet to my
mums pc, on NTL, and browse that way. How shite.

On a 1992 land rover defender fitted with 200tdi engine - the manual says to
remove the radiator one has to remove the viscous fan.  Is it indeed
necessary to remove this fan or can the radiator exchange be done without?
Any tips most gratefully received as I have to tackle this ...

OK...
V8 3.5i ex rangie, which was almost certainly a "flapper" system.
If I get hold of the hotwire system, how much hassle to fit it to this
engine?  Or am I better off sticking to a flapper?

Warning - adult content, sort-of.
Made us laugh, anyway.
http://www.bofunk.com/video/320/camel_toe.html

Well last night given I was working Nights and there was a good chance of
Getting Morph on to the works compound I went to work in him.
I got 20 Yards up the road and he died, so I suspected the fuel pump again
after the Pre Malvern hickups. I hit the starter and eventually he ...

Gonna get myself a snorkel for the unofficial, what else do I need to do to my 110 of 1990 vintage, it's
a TD BTW

Place round the corner from me have a 1997/8 Disco 1 Camel trophy Japanese import. It's got 26k on the
clock & has been used in showrooms etc so has not seen any action as such. It is stunning with all the
kit etc.
They are asking 14k for it, very expensive, but immaculate in ...

Not long now :-)
Lee D

Can anyone make any recommendations for people who can do a quality job
of gas converting a range rover.
Cheers
David

I am looking for a R/R have found a few but am unsure as to what engine i
should concentrate on,on paper the 4.6 seems to be slightly better on
fuel,anybody shed some light on this.What are your experiances?
mny thx

Hi, I have aquired a milner conversion plate to mate a Daihatsu 2.8TD engine
to a LR gearbox.
Question is I dont know which box!
Only marking is Milner Conversions logo and "K99" I'm hoping it's to mate to

My 1999 TD5 defender has just failed its MOT on emissions. I had put an
additive in the fuel and disconnected the chip but it still failed. Does
anyone have any other suggestions how to reduce the emissions, can you
'reset' the ecu? Could I remove the air filter? Clean the carbon ...

It took three days elapsed time, and about a day and 3/4 effort between
me an my son, but the Defender 110 now has a new crossmember.  A good
job I got one with extensions as it was pretty rotten.
Not a too bad job.  A few niggles:

steering damper differential ccontamination ?

My TD5 Defender is persuading me to swap out my basic fold up side steps to
a pair of Tombraider style steps (no real reason - just vanity I suspect).
I've been trawling the web for a few weeks - loads of plastic coated and
chequer plate varieties out there but who does the most ...